issues
search
macdylan
/
sm2uploader
A command-line tool for send the gcode file to Snapmaker Printers via WiFi connection.
MIT License
44
stars
4
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
强化擦料塔功能似乎有一些问题 Some questions about reinforce the prime tower
#23
funnygeeker
closed
1 week ago
8
Error: G-Code fix error(ignored): Invalid G-Code file
#22
hsai1020
opened
2 months ago
2
Error: "the copy or mirror mode is disabled for dual-extrusion models"
#21
3DPrintMunich
opened
3 months ago
1
AutoDiscovery - Broadcast address wrong
#20
bhuebschen
opened
3 months ago
0
Wrong temperatures are set for IDEX J1
#19
obertini78
closed
4 months ago
3
Save uploaded gcode when simulated OctoPrint server used
#18
nailgilaziev
opened
5 months ago
1
Error message while uploading - but print is doing well
#17
magnum61
opened
5 months ago
2
preview image
#16
rathorp80
closed
6 months ago
0
When printing with only the right nozzle, the nozzle temperature from the second layer is set to 0
#15
monohoshi
closed
4 months ago
3
Upload and start print automatically
#14
nailgilaziev
opened
6 months ago
6
Auto discovery not working
#13
adammhaile
opened
8 months ago
3
Fix broadcast address calculation
#12
lestrrat
closed
10 months ago
0
Broadcast address calculation was broken in 2c99a44
#11
lestrrat
closed
10 months ago
2
这个问题要怎么解决?
#10
gotoRobot
closed
10 months ago
2
Pressing YES is still required
#9
Fuchschr11
closed
10 months ago
8
Discovery doesn't work if subnet is not /24
#8
KyGunsAndRadio
closed
5 months ago
5
V1.8 is much slower than predecessor(s)
#7
Googliola
closed
4 months ago
13
i/o timeout
#6
robanderson
closed
1 year ago
1
got command set/id 172/165 but expected 1/5
#5
TylonHH
closed
1 year ago
2
Octoprint settings?
#4
Googliola
closed
1 year ago
4
Instructions are terrible.
#3
Learoy1
closed
1 year ago
2
pls make working for J1
#2
hliebscher
closed
1 year ago
2
Is this compatible with J1 as well?
#1
Googliola
closed
1 year ago
2