search

machineagency / jubilee

jubilee source files; for the docs, see:
https://jubilee3d.com
Other
551 stars 112 forks source link

Back panel: Duet 3 6HC and SBC holes are too close together #188

Open csnyder616 opened 2 years ago

csnyder616 commented 2 years ago

The back panel supplied by Filastruder (which I'm assuming is cut using the files in this repo) has the mounting hole for the Duet 3 and SBC too close together, blocking the power in port on the Pi. This hasn't been a problem until recently, as it's been possible to power the SBC from the Duet 3's 5V supply. However, starting with Duet 3 6HC v1.01a, it's no longer possible to power the SBC from the Duet 3.

This is easy enough to work around: just flip the Pi around, or drill more holes. But it would be nice to have a bit more breathing room in future iterations.

image

Poofjunior commented 2 years ago

Good catch. When I encountered this on mine, I mounted the Duet3 on taller standoffs (20mm) and was able to tuck the Pi power cable under the Duet 3. The pi is also flipped in my setup. Here's a picture:

PXL_20211028_022541382

Let me know if something like this configuration would fix your issue.

Finally, using taller standoffs for a Duet 3 setup isn't captured anywhere, so this is a good issue to track here.

csnyder616 commented 2 years ago

Oh, that's a great solution (funny that I'm thinking in 2D space while building a 3D printer...). +1 for adding this solution to the documentation.