GSM not ready

[GoogleCodeExporter]

Hi, i have a problem with gsm registration on Huawei E1552 gsm modem
I have installed it with no difficulty
This is the output of  dongle show device state dongle0
Device                  : dongle0
  State                   : GSM not registered
  Audio                   : /dev/ttyUSB1
  Data                    : /dev/ttyUSB2
  Voice                   : Yes
  SMS                     : Yes
  Manufacturer            : huawei
  Model                   : E1552
  Firmware                : 11.609.18.00.00
  IMEI                    : 3588120xxxxxxxx
  IMSI                    : 220011xxxxxxxxx
  GSM Registration Status : Not registered, not searching
  RSSI                    : 16, -116 dBm
  Mode                    : No Service
  Submode                 : No service
  Provider Name           : Telenor
  Location area code      :
  Cell ID                 :
  Subscriber Number       : 381638xxxxx
  SMS Service Center      : +38163xxxxx
  Use UCS-2 encoding      : Yes
  USSD use 7 bit encoding : Yes
  USSD use UCS-2 decoding : No
  Tasks in queue          : 0
  Commands in queue       : 0
  Call Waiting            : Disabled
  Current device state    : start
  Desired device state    : start
  When change state       : now
  Calls/Channels          : 0
    Active                : 0
    Held                  : 0
    Dialing               : 0
    Alerting              : 0
    Incoming              : 0
    Waiting               : 0
    Releasing             : 0
    Initializing          : 0

Elastix 2.3.0
Kernel 3.0.58-1.el5.elrepo
chan_dongle: Huawei 3G Dongle Channel Driver, Version 1.1, Revision 10
Project Home: http://code.google.com/p/asterisk-chan-dongle
Bug Reporting: http://code.google.com/p/asterisk-chan-dongle/issues/list

Any help is most welcome

Thank you 

Original issue reported on code.google.com by 011.da...@gmail.com on 18 Jan 2013 at 6:09

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

looks like a network problem . put another sim in to dongle like zong's etc 
.make sure you have not pin code enabled . if pin code is enabled ,you need to 
disable it.  
mine is : 
Device                  : dongle0
  State                   : Free
  Audio                   : /dev/ttyUSB2
  Data                    : /dev/ttyUSB3
  Voice                   : Yes
  SMS                     : Yes
  Manufacturer            : huawei
  Model                   : E180
  Firmware                : 11.126.10.00.124
  IMEI                    : 35xxxxxxxxx
  IMSI                    : 41xxxxxxxxx
  GSM Registration Status : Registered, home network
sometime using dongle with port based configuration is tricky and problematic . 
use IMIE and IMSI based configuration and let chan_dongle decide the ports . 
may be that'll solve your problem,e.g in /etc/asterisk/dongle.conf

[dongle0]
;audio=/dev/ttyUSB1     ; tty port for audio connection;    
;data=/dev/ttyUSB0      ; tty port for AT commands;         

; or you can omit both audio and data together and use imei=123456789012345 
and/or ;imsi=123456789012345
;  imei and imsi must contain exactly 15 digits !
;  imei/imsi discovery is available on Linux only
imei=3xxxxxxxxxxxx
imsi=4xxxxxxxxxxxx
__________________________

localhost*CLI> dongle show version

chan_dongle: Huawei 3G Dongle Channel Driver, Version 1.1, Revision 16
Project Home:

Original comment by alihmd....@gmail.com on 27 Feb 2013 at 2:48

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

solved ?

Original comment by bg_...@mail.ru on 27 Apr 2013 at 3:36

• Changed state: Accepted

[GoogleCodeExporter]

Yes it was solved 
I disabled autorun(cd & usb mass storage options) via Huawei modem unlocker :)
Works great

Original comment by 011.da...@gmail.com on 30 Apr 2013 at 9:00

[GoogleCodeExporter]

Olá,

Estou com um grande problema:
meu chan_dongle não reconhece o modem Huawei E303 HSPA

Podem me ajudar com a configuração do modem?

status:
==================================================
gsm*CLI> dongle show device state dongle0
-------------- Status -------------
  Device                  : dongle0
  State                   : Not connected Start scheduled
  Audio                   : /dev/ttyUSB1
  Data                    : /dev/ttyUSB2
  Voice                   : No
  SMS                     : No
  Manufacturer            :
  Model                   :
  Firmware                :
  IMEI                    :
  IMSI                    :
  GSM Registration Status : Unknown
  RSSI                    : 0, <= -113 dBm
  Mode                    : No Service
  Submode                 : No service
  Provider Name           : NONE
  Location area code      :
  Cell ID                 :
  Subscriber Number       : Unknown
  SMS Service Center      :
  Use UCS-2 encoding      : No
  USSD use 7 bit encoding : No
  USSD use UCS-2 decoding : Yes
  Tasks in queue          : 0
  Commands in queue       : 0
  Call Waiting            : Disabled
  Current device state    : stop
  Desired device state    : start
  When change state       : now
  Calls/Channels          : 0
    Active                : 0
    Held                  : 0
    Dialing               : 0
    Alerting              : 0
    Incoming              : 0
    Waiting               : 0
    Releasing             : 0
    Initializing          : 0

========================================
Verbosity is at least 6
gsm*CLI> dongle show version

chan_dongle: Huawei 3G Dongle Channel Driver, Version 1.1, Revision 42
Project Home: http://code.google.com/p/asterisk-chan-dongle
Bug Reporting: http://code.google.com/p/asterisk-chan-dongle/issues/list

=====================================

Original comment by e...@eletroe.com.br on 11 Dec 2014 at 4:19