search

madMAx43v3r / chia-gigahorse

221 stars 31 forks source link

FileStore: write('/mnt/local/cuda_plot_tmp2_1695054999750662.tmp') failed with: Structure needs cleaning #208

Closed Mathis436 closed 1 year ago

Mathis436 commented 1 year ago

Working Directory: /mnt/temp/ Working Directory 2: /mnt/local/ Compression Level: C8 (xbits = 8, final table = 4) Plot Name: plot-k32-c8-2023-09-18-16-36-583503acf64bf0c25d2f50ba50d33c4a7e03a99b37c7b21ae01df785459784d0 Created disk buffer /mnt/local/cuda_plot_tmp2_1695054999750662.tmp [P1] Setup took 0.707 sec [P1] Table 1 took 85.795 sec, 4294967296 entries, 16789222 max, 66622 tmp, 0 GB/s up, 0.396296 GB/s down [P1] Table 2 took 86.778 sec, 4294839248 entries, 16789540 max, 66587 tmp, 0.368757 GB/s up, 0.587709 GB/s down [P1] Table 3 took 99.837 sec, 4294624454 entries, 16788671 max, 66617 tmp, 0.480769 GB/s up, 0.85139 GB/s down FileStore: write('/mnt/local/cuda_plot_tmp2_1695054999750662.tmp') failed with: Structure needs cleaning [P1] Table 4 took 102.703 sec, 4294190898 entries, 16785874 max, 66619 tmp, 0.778883 GB/s up, 1.15868 GB/s down FileStore: write('/mnt/local/cuda_plot_tmp2_1695054999750662.tmp') failed with: Structure needs cleaning

this is a 1/2 ram GPU plotter. any ideas?

Kruger1981 commented 1 year ago

Seems to me that its a Linux issue not the gigahorse.

If you are using a NVME or SSD to plot may indicate that its about to die.

Can you test plotting on a different drive?

Kruger1981 commented 1 year ago

Test formatting the drive, reboot and plot to see if the issue persists.

Mathis436 commented 1 year ago

Trying that now. Ill report back if any thing changes.

Mathis436 commented 1 year ago

I tried a reformat, reboot, and overnight plotting and all is fine!