search

madMAx43v3r / chia-gigahorse

220 stars 32 forks source link

Plots not loading #226

Open Mccmike930 opened 8 months ago

Mccmike930 commented 8 months ago

Screenshot_20231025_084907_Discord

sacrys commented 8 months ago

I am having the same problems. The new Farmer recognises the plots, but does not connect and therefore does not generate partials. I personally am in spacefarmers pool and before updating farmer everything was fine. However, the new C18 plots were not recognised as valid. Now it recognises the new plots but does not generate partials.

image
madMAx43v3r commented 8 months ago

are you using the community node? if yes need to use the new one, port 18445

sacrys commented 8 months ago

are you using the community node? if yes need to use the new one, port 18445

Sorry. I'm not sure what's the community node. I'm in windows, using power shell to execute the farmer. I don't know how to change the ports that it uses.

sacrys commented 8 months ago

are you using the community node? if yes need to use the new one, port 18445

Sorry. I'm not sure what's the community node. I'm in windows, using power shell to execute the farmer. I don't know how to change the ports that it uses.

Hi again, I just found out about the community node, and I think I've been running everything from my own computer locally until now. I've looked up how to change it to work with the new version in the config.yaml file anyway: farmer: full_node_peer: host: community-node.spacefarmers.io port: 18445 But it still doesn't work:

image

Should any other lines be changed? such as that of: harvester_peer: host: localhost port: 8448

And the last question: What configuration would I have to use, to continue using these plots in the pool, but still compute them on my own pc? Leave the localhost but changing the port would be enough? Thanks for the help.

NewSunSEO commented 3 months ago

are you using the community node? if yes need to use the new one, port 18445

I am having the same problem. I was using C18 plots with a farmer & two remote harvesters. Everything was working perfectly for months. I updated to 3.0 & now my plots are being seen in the farmer summary, but nothing is showing on Space Pool. I went from almost 2PiB down to almost zero. I just changed this, like was suggested above. I was using the default settings before this: full_node_peer: host: community-node.spacefarmers.io port: 18445

madMAx43v3r commented 3 months ago

You need to wait for the 3.0 community node.

NewSunSEO commented 3 months ago

You need to wait for the 3.0 community node.

Thank you for your reply Max. I upgraded to 3.0 Saturday. By late Monday I was down to nearly zero TB from almost 2 PiB on Space Pool, so I tried the full_node_peer: host: community-node.spacefarmers.io / port: 18445, hoping what I saw in this post would get the plots showing up there again. I tried it a few hours ago, but I should put it back to the default settings instead?

Thank you

madMAx43v3r commented 3 months ago

The community-node.spacefarmers.io on port 18445 will not work for sure. I don't know what the issue is in your case, there could be many reasons. Lets hop on discord and debug there.

NewSunSEO commented 3 months ago

Hello Max, I added another HBA so I could add more disks to my R720 for my main FARMER. I reinstalled Proxmox & started fresh with TrueNAS. I am plotting new C 30 plots right now. I am still seeing barely anything on SpacePool. I have some external HDD’s that are showing on SpacePool, with C7 plots created in the Chia GUI.

I am still not seeing anything from my main Chia farm since updating to 3.0:

FARMER – 250 C30 HARVESTER01 – 3740 C18 HARVESTER02 – 3740 C18

I’m now ready anytime you are, to debug with you on Discord. I will open that up & wait to hear from you.

The community-node.spacefarmers.io on port 18445 will not work for sure. I don't know what the issue is in your case, there could be many reasons. Lets hop on discord and debug there.

— Reply to this email directly, view it on GitHubhttps://github.com/madMAx43v3r/chia-gigahorse/issues/226#issuecomment-1991077122, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ACWX27XRZBT47KAKA2JBK2LYX27Q5AVCNFSM6AAAAAA6PKSJWGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJRGA3TOMJSGI. You are receiving this because you commented.Message ID: @.**@.>>

NewSunSEO commented 3 months ago

Hey Max, I cannot find a working link to your Discord anywhere. The ones I found no longer work. Could you send a new link?

Thank you,

Hello Max, I added another HBA so I could add more disks to my R720 for my main FARMER. I reinstalled Proxmox & started fresh with TrueNAS. I am plotting new C 30 plots right now. I am still seeing barely anything on SpacePool. I have some external HDD’s that are showing on SpacePool, with C7 plots created in the Chia GUI.

I am still not seeing anything from my main Chia farm since updating to 3.0:

FARMER – 250 C30 HARVESTER01 – 3740 C18 HARVESTER02 – 3740 C18

I’m now ready anytime you are, to debug with you on Discord. I will open that up & wait to hear from you.

The community-node.spacefarmers.io on port 18445 will not work for sure. I don't know what the issue is in your case, there could be many reasons. Lets hop on discord and debug there.

— Reply to this email directly, view it on GitHubhttps://github.com/madMAx43v3r/chia-gigahorse/issues/226#issuecomment-1991077122, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ACWX27XRZBT47KAKA2JBK2LYX27Q5AVCNFSM6AAAAAA6PKSJWGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJRGA3TOMJSGI. You are receiving this because you commented.Message ID: @.**@.>>

madMAx43v3r commented 3 months ago

this one should still work: https://discord.gg/BswFhNkMzY

I am still seeing barely anything on SpacePool

You only have 250 C30, what was expected?

NewSunSEO commented 3 months ago

Hello Max, I’m going on Discord now & will watch to see if you are on there over the next few hours. I’m not expecting a lot from the new C30 plots, but the old C18 plots are not being seen on SpacePool either. That’s what alerted me something isn’t right since updating to the new 3.0 version, as SpacePool didn’t move at all once I started farming with the 7,480 C18 plots again.

FARMER – 500 C30 HARVESTER01 – 3740 C18 HARVESTER02 – 3740 C18

None of those plots are being seen by SpacePool since I’ve updated to 3.0.

Thank you,

this one should still work: https://discord.gg/BswFhNkMzY

I am still seeing barely anything on SpacePool

You only have 250 C30, what was expected?

— Reply to this email directly, view it on GitHubhttps://github.com/madMAx43v3r/chia-gigahorse/issues/226#issuecomment-2002069052, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ACWX27QRP3KDTPV3XGZFVYLYYSCZPAVCNFSM6AAAAAA6PKSJWGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA3DSMBVGI. You are receiving this because you commented.Message ID: @.**@.>>

NewSunSEO commented 3 months ago

I posted in the mmx-support section.

Thank you,

this one should still work: https://discord.gg/BswFhNkMzY

I am still seeing barely anything on SpacePool

You only have 250 C30, what was expected?

— Reply to this email directly, view it on GitHubhttps://github.com/madMAx43v3r/chia-gigahorse/issues/226#issuecomment-2002069052, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ACWX27QRP3KDTPV3XGZFVYLYYSCZPAVCNFSM6AAAAAA6PKSJWGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMBSGA3DSMBVGI. You are receiving this because you commented.Message ID: @.**@.>>