search

maduce / fosscad-repo

Official FOSSCAD Library Repository
http://fosscad.org
GNU General Public License v3.0
1.61k stars 1.05k forks source link

This says it includes the Kisslicer ini settings but it does not... #2

Closed obja closed 7 years ago

obja commented 8 years ago

I see the ones for Nylon - would you please commit the Kisslicer settings for ABS as well?

maduce commented 8 years ago

the NS is for nylon and the GS was tested with ABS. cb didnt give us kisslicer files for the GS but I can ask him the next time I talk to him.

obja commented 8 years ago

Thank you that would be great if you would. I have had pretty o.k. success with it just by using the settings mentioned. The other very ODD thing about the files is the front take down pin/pivot pin holes are not in the file and the posts where one would drill seem small. I am guessing the expectation is to drill them out but not real sure yet. Thanks though for all of your work.

maduce commented 8 years ago

Yes, if the holes were not in the cad cb drilled them after printing. I didn't design this specific lower so I am not entirely sure why he did this. 3Dprinters can be weird about holes depending on the printer so I suspect cb just added the holes after the fact to keep the print more solid around the take down and pivot pin area. I will definitely ask the next time I talk to cb.