search

mahjongg2 / ZX81plus38

Mij latest ZX81 clone without ULA built from discrete pin through hole components
146 stars 16 forks source link

Revision 2.0 #11

Closed ghhann closed 1 year ago

ghhann commented 1 year ago

Thanks for doing this project. I read that you now have a revision 2.0. Anyway to get the files to send to pcbway or are you listing it as a shared project

All my best

mahjongg2 commented 1 year ago

Its not revision 2.0 but revision 1.10, there should be no electrical differences with revision 1.9, just the positions of a few 2.5mm drill holes for mounting the PCB to a real ZX-81 plastic enclosure were corrected, so the ZX81+38 PCB will now definitely fit into the real enclosure. So even though the schematic is now also called rev 1.10, it is exactly the same as revision 1.9. I also added the KiCAD files for revision 1.10, so if anyone ever wants to continue with my design, please use revision 1.10. I'm in contact with PCBWay, and will try to list my revision 1.10 design as a shared project. will mention that here if it happens.

ghhann commented 1 year ago

Thank you I was planning on using a real case. Thanks!

mahjongg2 commented 1 year ago

added one comment, BOM revision 1.10

Op 13 jun. 2023, om 17:57 heeft ghhann @.***> het volgende geschreven:

Closed #11 https://github.com/mahjongg2/ZX81plus38/issues/11 as completed.

— Reply to this email directly, view it on GitHub https://github.com/mahjongg2/ZX81plus38/issues/11#event-9518252887, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACAHA4CNPFJBBYMKQJZHMYDXLCEYHANCNFSM6AAAAAAY43DCI4. You are receiving this because you commented.