Eledpar and non-arabic-regular-footnotes causes error

In my document I use alph-regular-footnotes. As I have more than 24 footnotes I use the perpage.sty. This test document causes an error (which was not there with ledpar):

\documentclass{article}
\usepackage{eledmac}
\usepackage{eledpar}
\renewcommand{\thefootnoteA}{\alph{footnoteA}}
\usepackage{perpage}
\MakePerPage{footnoteA}
\begin{document}
 \begin{pairs}
   \begin{Leftside}
    \beginnumbering
    \pstart
    Lorem\footnoteA{Test} ipsum\footnoteA{Test} dolor\footnoteA{Test} sit\footnoteA{Test} amet,\footnoteA{Test}
    \edtext{consectetuer}{\Afootnote{Test}} adipiscing\footnoteA{Test} elit.\footnoteA{Test} Etiam\footnoteA{Test}
    lobortis\footnoteA{Test} facilisis\footnoteA{Test} sem.\footnoteA{Test} Nullam\footnoteA{Test} nec\footnoteA{Test} mi\footnoteA{Test} et\footnoteA{Test} neque\footnoteA{Test} pharetra\footnoteA{Test}
    sollicitudin. Vivamus nunc nunc, molestie ut, ultricies vel,
    semper in, velit.
    \pend
    \pstart
    Ut porttitor. Praesent in sapien.\ledsidenote{\textit{A}} Lorem ipsum dolor sit amet,
    consectetuer adipiscing elit. Duis fringilla\footnoteA{\textit{Test}} tristique
    \edtext{neque}{\Afootnote{Test}}.
    \pend
    \endnumbering
  \end{Leftside}
   \begin{Rightside}
     \beginnumbering
     \pstart
     Lorem ipsum dolor sit amet,
     \edtext{consectetuer}{\Afootnote{Test}} adipiscing elit. Etiam
     lobortis facilisis sem. Nullam nec mi et neque pharetra
     sollicitudin.
     \pend
     \pstart
     Ut porttitor. Praesent in sapien. Lorem ipsum dolor sit amet,
     consectetuer adipiscing elit. Duis fringilla tristique
     \edtext{neque}{\Afootnote{Test}}.
     \pend
     \endnumbering
   \end{Rightside}
 \Columns
 \end{pairs}
\clearpage
 \begin{pairs}
   \begin{Leftside}
    \selectlanguage{latin}
    \beginnumbering
    \pstart
    Lorem\footnoteA{Test} ipsum\footnoteA{Test} dolor\footnoteA{Test} sit\footnoteA{Test} amet,\footnoteA{Test}
    \edtext{consectetuer}{\Afootnote{Test}} adipiscing\footnoteA{Test} elit.\footnoteA{Test} Etiam\footnoteA{Test}
    lobortis\footnoteA{Test} facilisis\footnoteA{Test} sem.\footnoteA{Test} Nullam\footnoteA{Test} nec\footnoteA{Test} mi\footnoteA{Test} et\footnoteA{Test} neque\footnoteA{Test} pharetra\footnoteA{Test}
    sollicitudin. Vivamus nunc nunc, molestie ut, ultricies vel,
    semper in, velit.
    \pend
    \pstart
    Ut porttitor. Praesent in sapien.\ledsidenote{\textit{A}} Lorem ipsum dolor sit amet,
    consectetuer adipiscing elit. Duis fringilla\footnoteA{\textit{Test}} tristique
    \edtext{neque}{\Afootnote{Test}}.
    \pend
    \endnumbering
  \end{Leftside}
   \begin{Rightside}
     \beginnumbering
     \pstart
     Lorem ipsum dolor sit amet,
     \edtext{consectetuer}{\Afootnote{Test}} adipiscing elit. Etiam
     lobortis facilisis sem. Nullam nec mi et neque pharetra
     sollicitudin.
     \pend
     \pstart
     Ut porttitor. Praesent in sapien. Lorem ipsum dolor sit amet,
     consectetuer adipiscing elit. Duis fringilla tristique
     \edtext{neque}{\Afootnote{Test}}.
     \pend
     \endnumbering
   \end{Rightside}
 \Columns
 \end{pairs}
\end{document}

The error in the log-file (in the first run – after the Counter too large-error, which is expectable) is:

! LaTeX Error: Counter too large.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.50     lobortis\footnoteA{Test}
                                  facilisis\footnoteA{Test} sem.\footnoteA{T...

? r
OK, entering \nonstopmode...
! Undefined control sequence.
\GenericError  ...                                
                                                    #4  \errhelp \@err@     ...
l.50     lobortis\footnoteA{Test}
                                  facilisis\footnoteA{Test} sem.\footnoteA{T...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \let \@err@               ...
l.50     lobortis\footnoteA{Test}
                                  facilisis\footnoteA{Test} sem.\footnoteA{T...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \@empty \def \MessageBreak...
l.50     lobortis\footnoteA{Test}
                                  facilisis\footnoteA{Test} sem.\footnoteA{T...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                     \endgroup 
l.50     lobortis\footnoteA{Test}
                                  facilisis\footnoteA{Test} sem.\footnoteA{T...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! LaTeX Error: Counter too large.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.50 ...\footnoteA{Test} facilisis\footnoteA{Test}
                                                   sem.\footnoteA{Test} Null...

You've lost some text.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
\GenericError  ...                                
                                                    #4  \errhelp \@err@     ...
l.50 ...\footnoteA{Test} facilisis\footnoteA{Test}
                                                   sem.\footnoteA{Test} Null...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \let \@err@               ...
l.50 ...\footnoteA{Test} facilisis\footnoteA{Test}
                                                   sem.\footnoteA{Test} Null...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \@empty \def \MessageBreak...
l.50 ...\footnoteA{Test} facilisis\footnoteA{Test}
                                                   sem.\footnoteA{Test} Null...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                     \endgroup 
l.50 ...\footnoteA{Test} facilisis\footnoteA{Test}
                                                   sem.\footnoteA{Test} Null...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! LaTeX Error: Counter too large.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.50 ...lisis\footnoteA{Test} sem.\footnoteA{Test}
                                                   Nullam\footnoteA{Test} ne...

You've lost some text.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
\GenericError  ...                                
                                                    #4  \errhelp \@err@     ...
l.50 ...lisis\footnoteA{Test} sem.\footnoteA{Test}
                                                   Nullam\footnoteA{Test} ne...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \let \@err@               ...
l.50 ...lisis\footnoteA{Test} sem.\footnoteA{Test}
                                                   Nullam\footnoteA{Test} ne...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \@empty \def \MessageBreak...
l.50 ...lisis\footnoteA{Test} sem.\footnoteA{Test}
                                                   Nullam\footnoteA{Test} ne...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                     \endgroup 
l.50 ...lisis\footnoteA{Test} sem.\footnoteA{Test}
                                                   Nullam\footnoteA{Test} ne...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! LaTeX Error: Counter too large.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.50 ...em.\footnoteA{Test} Nullam\footnoteA{Test}
                                                   nec\footnoteA{Test} mi\fo...

You've lost some text.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
\GenericError  ...                                
                                                    #4  \errhelp \@err@     ...
l.50 ...em.\footnoteA{Test} Nullam\footnoteA{Test}
                                                   nec\footnoteA{Test} mi\fo...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \let \@err@               ...
l.50 ...em.\footnoteA{Test} Nullam\footnoteA{Test}
                                                   nec\footnoteA{Test} mi\fo...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \@empty \def \MessageBreak...
l.50 ...em.\footnoteA{Test} Nullam\footnoteA{Test}
                                                   nec\footnoteA{Test} mi\fo...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                     \endgroup 
l.50 ...em.\footnoteA{Test} Nullam\footnoteA{Test}
                                                   nec\footnoteA{Test} mi\fo...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! LaTeX Error: Counter too large.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.50 ...Nullam\footnoteA{Test} nec\footnoteA{Test}
                                                   mi\footnoteA{Test} et\foo...

You've lost some text.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
\GenericError  ...                                
                                                    #4  \errhelp \@err@     ...
l.50 ...Nullam\footnoteA{Test} nec\footnoteA{Test}
                                                   mi\footnoteA{Test} et\foo...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \let \@err@               ...
l.50 ...Nullam\footnoteA{Test} nec\footnoteA{Test}
                                                   mi\footnoteA{Test} et\foo...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \@empty \def \MessageBreak...
l.50 ...Nullam\footnoteA{Test} nec\footnoteA{Test}
                                                   mi\footnoteA{Test} et\foo...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                     \endgroup 
l.50 ...Nullam\footnoteA{Test} nec\footnoteA{Test}
                                                   mi\footnoteA{Test} et\foo...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! LaTeX Error: Counter too large.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.50 ...st} nec\footnoteA{Test} mi\footnoteA{Test}
                                                   et\footnoteA{Test} neque\...

You've lost some text.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
\GenericError  ...                                
                                                    #4  \errhelp \@err@     ...
l.50 ...st} nec\footnoteA{Test} mi\footnoteA{Test}
                                                   et\footnoteA{Test} neque\...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \let \@err@               ...
l.50 ...st} nec\footnoteA{Test} mi\footnoteA{Test}
                                                   et\footnoteA{Test} neque\...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \@empty \def \MessageBreak...
l.50 ...st} nec\footnoteA{Test} mi\footnoteA{Test}
                                                   et\footnoteA{Test} neque\...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                     \endgroup 
l.50 ...st} nec\footnoteA{Test} mi\footnoteA{Test}
                                                   et\footnoteA{Test} neque\...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! LaTeX Error: Counter too large.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.50 ...est} mi\footnoteA{Test} et\footnoteA{Test}
                                                   neque\footnoteA{Test} pha...

You've lost some text.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
\GenericError  ...                                
                                                    #4  \errhelp \@err@     ...
l.50 ...est} mi\footnoteA{Test} et\footnoteA{Test}
                                                   neque\footnoteA{Test} pha...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \let \@err@               ...
l.50 ...est} mi\footnoteA{Test} et\footnoteA{Test}
                                                   neque\footnoteA{Test} pha...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \@empty \def \MessageBreak...
l.50 ...est} mi\footnoteA{Test} et\footnoteA{Test}
                                                   neque\footnoteA{Test} pha...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                     \endgroup 
l.50 ...est} mi\footnoteA{Test} et\footnoteA{Test}
                                                   neque\footnoteA{Test} pha...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! LaTeX Error: Counter too large.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.50 ...} et\footnoteA{Test} neque\footnoteA{Test}
                                                   pharetra\footnoteA{Test}
You've lost some text.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
\GenericError  ...                                
                                                    #4  \errhelp \@err@     ...
l.50 ...} et\footnoteA{Test} neque\footnoteA{Test}
                                                   pharetra\footnoteA{Test}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \let \@err@               ...
l.50 ...} et\footnoteA{Test} neque\footnoteA{Test}
                                                   pharetra\footnoteA{Test}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \@empty \def \MessageBreak...
l.50 ...} et\footnoteA{Test} neque\footnoteA{Test}
                                                   pharetra\footnoteA{Test}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                     \endgroup 
l.50 ...} et\footnoteA{Test} neque\footnoteA{Test}
                                                   pharetra\footnoteA{Test}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! LaTeX Error: Counter too large.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.50 ...e\footnoteA{Test} pharetra\footnoteA{Test}

You've lost some text.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
\GenericError  ...                                
                                                    #4  \errhelp \@err@     ...
l.50 ...e\footnoteA{Test} pharetra\footnoteA{Test}

The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \let \@err@               ...
l.50 ...e\footnoteA{Test} pharetra\footnoteA{Test}

The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \@empty \def \MessageBreak...
l.50 ...e\footnoteA{Test} pharetra\footnoteA{Test}

The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                     \endgroup 
l.50 ...e\footnoteA{Test} pharetra\footnoteA{Test}

The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

Overfull \hbox (3.17635pt too wide) in paragraph at lines 48--53
[]\OT1/cmr/m/n/10 Lorem[][][][] ip-sum[][][][] do-lor[][][][] sit[][][][] amet,
[][][][]
 []

Overfull \hbox (7.56154pt too wide) in paragraph at lines 48--53
[]\OT1/cmr/m/n/10 con-sectetuer[] adip-isc-ing[][][][] elit.[][][][] Etiam[][][
][]
 []

! LaTeX Error: Counter too large.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...                                              

l.56 ...t. Duis fringilla\footnoteA{\textit{Test}}
                                                   tristique
You've lost some text.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
\GenericError  ...                                
                                                    #4  \errhelp \@err@     ...
l.56 ...t. Duis fringilla\footnoteA{\textit{Test}}
                                                   tristique
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \let \@err@               ...
l.56 ...t. Duis fringilla\footnoteA{\textit{Test}}
                                                   tristique
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                  \@empty \def \MessageBreak...
l.56 ...t. Duis fringilla\footnoteA{\textit{Test}}
                                                   tristique
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\GenericError  ...                                
                                                     \endgroup 
l.56 ...t. Duis fringilla\footnoteA{\textit{Test}}
                                                   tristique
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

Overfull \hbox (8.57538pt too wide) in paragraph at lines 55--58
\OT1/cmr/m/n/10 sectetuer adip-isc-ing elit. Duis fringilla[][][][]
 []

eledmac reminder: 
 The number of the footnotes in this section has changed since the last run.
 You will need to run LaTeX two more times before the footnote placement
 and line numbering in this section are correct.
Section 2R 

Package eledmac Warning: Can't find line-list file test.2R on input line 62.

Overfull \hbox (0.83464pt too wide) in paragraph at lines 64--68
[]\OT1/cmr/m/n/10 Lorem ip-sum do-lor sit amet, []con-
 []

Overfull \hbox (7.18654pt too wide) in paragraph at lines 64--68
\OT1/cmr/m/n/10 sectetuer[] adip-isc-ing elit. Etiam lobor-
 []

Overfull \hbox (8.07542pt too wide) in paragraph at lines 70--73
\OT1/cmr/m/n/10 sectetuer adip-isc-ing elit. Duis fringilla
 []

eledmac reminder: 
 The number of the footnotes in this section has changed since the last run.
 You will need to run LaTeX two more times before the footnote placement
 and line numbering in this section are correct.

Overfull \hbox (3.17635pt too wide) detected at line 76
[][]\OT1/cmr/m/n/10 Lorem[][][][] ip-sum[][][][] do-lor[][][][] sit[][][][] ame
t,[][][][]
 []

Overfull \hbox (0.83464pt too wide) detected at line 76
[][]\OT1/cmr/m/n/10 Lorem ip-sum do-lor sit amet, []con-
 []

Overfull \hbox (7.56154pt too wide) detected at line 76
[][]\OT1/cmr/m/n/10 con-sectetuer[] adip-isc-ing[][][][] elit.[][][][] Etiam[][
][][]
 []

Overfull \hbox (7.18654pt too wide) detected at line 76
[]\OT1/cmr/m/n/10 sectetuer[] adip-isc-ing elit. Etiam lobor-
 []

Overfull \hbox (8.57538pt too wide) detected at line 76
[]\OT1/cmr/m/n/10 sectetuer adip-isc-ing elit. Duis fringilla[][][][]
 []

Overfull \hbox (8.07542pt too wide) detected at line 76
[]\OT1/cmr/m/n/10 sectetuer adip-isc-ing elit. Duis fringilla
 []

! Missing { inserted.
<to be read again> 
                   \let 
l.76  \Columns

A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)

! Extra }, or forgotten \endgroup.
<argument> ...selectfont \@nameuse {@thefnmarkA}}}

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
<recently read> }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
\footfmtA ...mfontX@#1}\@nameuse {footfootmark#1}}
                                                  \strut #2\strut \par }
l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing $ inserted.
<inserted text> 
                $
l.76  \Columns

I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.

! Extra }, or forgotten \endgroup.
\footfmtA ...ootfootmark#1}}\strut #2\strut \par }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten \endgroup.
\regvfootnoteA ...euse {footfmt#1}{#1}{#2}\egroup 

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing { inserted.
<to be read again> 
                   \let 
l.76  \Columns

A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)

! Extra }, or forgotten \endgroup.
<argument> ...selectfont \@nameuse {@thefnmarkA}}}

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
<recently read> }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
\footfmtA ...mfontX@#1}\@nameuse {footfootmark#1}}
                                                  \strut #2\strut \par }
l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing $ inserted.
<inserted text> 
                $
l.76  \Columns

I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.

! Extra }, or forgotten \endgroup.
\footfmtA ...ootfootmark#1}}\strut #2\strut \par }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten \endgroup.
\regvfootnoteA ...euse {footfmt#1}{#1}{#2}\egroup 

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing { inserted.
<to be read again> 
                   \let 
l.76  \Columns

A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)

! Extra }, or forgotten \endgroup.
<argument> ...selectfont \@nameuse {@thefnmarkA}}}

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
<recently read> }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
\footfmtA ...mfontX@#1}\@nameuse {footfootmark#1}}
                                                  \strut #2\strut \par }
l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing $ inserted.
<inserted text> 
                $
l.76  \Columns

I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.

! Extra }, or forgotten \endgroup.
\footfmtA ...ootfootmark#1}}\strut #2\strut \par }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten \endgroup.
\regvfootnoteA ...euse {footfmt#1}{#1}{#2}\egroup 

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing { inserted.
<to be read again> 
                   \let 
l.76  \Columns

A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)

! Extra }, or forgotten \endgroup.
<argument> ...selectfont \@nameuse {@thefnmarkA}}}

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
<recently read> }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
\footfmtA ...mfontX@#1}\@nameuse {footfootmark#1}}
                                                  \strut #2\strut \par }
l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing $ inserted.
<inserted text> 
                $
l.76  \Columns

I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.

! Extra }, or forgotten \endgroup.
\footfmtA ...ootfootmark#1}}\strut #2\strut \par }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten \endgroup.
\regvfootnoteA ...euse {footfmt#1}{#1}{#2}\egroup 

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing { inserted.
<to be read again> 
                   \let 
l.76  \Columns

A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)

! Extra }, or forgotten \endgroup.
<argument> ...selectfont \@nameuse {@thefnmarkA}}}

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
<recently read> }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
\footfmtA ...mfontX@#1}\@nameuse {footfootmark#1}}
                                                  \strut #2\strut \par }
l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing $ inserted.
<inserted text> 
                $
l.76  \Columns

I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.

! Extra }, or forgotten \endgroup.
\footfmtA ...ootfootmark#1}}\strut #2\strut \par }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten \endgroup.
\regvfootnoteA ...euse {footfmt#1}{#1}{#2}\egroup 

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing { inserted.
<to be read again> 
                   \let 
l.76  \Columns

A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)

! Extra }, or forgotten \endgroup.
<argument> ...selectfont \@nameuse {@thefnmarkA}}}

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
<recently read> }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
\footfmtA ...mfontX@#1}\@nameuse {footfootmark#1}}
                                                  \strut #2\strut \par }
l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing $ inserted.
<inserted text> 
                $
l.76  \Columns

I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.

! Extra }, or forgotten \endgroup.
\footfmtA ...ootfootmark#1}}\strut #2\strut \par }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten \endgroup.
\regvfootnoteA ...euse {footfmt#1}{#1}{#2}\egroup 

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing { inserted.
<to be read again> 
                   \let 
l.76  \Columns

A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)

! Extra }, or forgotten \endgroup.
<argument> ...selectfont \@nameuse {@thefnmarkA}}}

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
<recently read> }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
\footfmtA ...mfontX@#1}\@nameuse {footfootmark#1}}
                                                  \strut #2\strut \par }
l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing $ inserted.
<inserted text> 
                $
l.76  \Columns

I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.

! Extra }, or forgotten \endgroup.
\footfmtA ...ootfootmark#1}}\strut #2\strut \par }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten \endgroup.
\regvfootnoteA ...euse {footfmt#1}{#1}{#2}\egroup 

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing { inserted.
<to be read again> 
                   \let 
l.76  \Columns

A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)

! Extra }, or forgotten \endgroup.
<argument> ...selectfont \@nameuse {@thefnmarkA}}}

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
<recently read> }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
\footfmtA ...mfontX@#1}\@nameuse {footfootmark#1}}
                                                  \strut #2\strut \par }
l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing $ inserted.
<inserted text> 
                $
l.76  \Columns

I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.

! Extra }, or forgotten \endgroup.
\footfmtA ...ootfootmark#1}}\strut #2\strut \par }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten \endgroup.
\regvfootnoteA ...euse {footfmt#1}{#1}{#2}\egroup 

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing { inserted.
<to be read again> 
                   \let 
l.76  \Columns

A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)

! Extra }, or forgotten \endgroup.
<argument> ...selectfont \@nameuse {@thefnmarkA}}}

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
<recently read> }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
\footfmtA ...mfontX@#1}\@nameuse {footfootmark#1}}
                                                  \strut #2\strut \par }
l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing $ inserted.
<inserted text> 
                $
l.76  \Columns

I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.

! Extra }, or forgotten \endgroup.
\footfmtA ...ootfootmark#1}}\strut #2\strut \par }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten \endgroup.
\regvfootnoteA ...euse {footfmt#1}{#1}{#2}\egroup 

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing { inserted.
<to be read again> 
                   \let 
l.76  \Columns

A left brace was mandatory here, so I've put one in.
You might want to delete and/or insert some corrections
so that I will find a matching right brace soon.
(If you're confused by all this, try typing `I}' now.)

! Extra }, or forgotten \endgroup.
<argument> ...selectfont \@nameuse {@thefnmarkA}}}

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
<recently read> }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten $.
\footfmtA ...mfontX@#1}\@nameuse {footfootmark#1}}
                                                  \strut #2\strut \par }
l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Missing $ inserted.
<inserted text> 
                $
l.76  \Columns

I've inserted a begin-math/end-math symbol since I think
you left one out. Proceed, with fingers crossed.

! Extra }, or forgotten \endgroup.
\footfmtA ...ootfootmark#1}}\strut #2\strut \par }

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

! Extra }, or forgotten \endgroup.
\regvfootnoteA ...euse {footfmt#1}{#1}{#2}\egroup 

l.76  \Columns

I've deleted a group-closing symbol because it seems to be
spurious, as in `$x}$'. But perhaps the } is legitimate and
you forgot something else, as in `\hbox{$x}'. In such cases
the way to recover is to insert both the forgotten and the
deleted material, e.g., by typing `I$}'.

Runaway argument?
{\xargs@put@arg ,\xargs@put@arg ,\xargs@put@arg ,\xargs@test@opt {Z},
! TeX capacity exceeded, sorry [main memory size=5000000].
\normalfootfmt ...s@put@arg ,\xargs@test@opt {Z},}

l.76  \Columns

If you really absolutely need more capacity,
you can ask a wizard to enlarge me.

Here is how much of TeX's memory you used:
 18039 strings out of 493926
 308994 string characters out of 6155923
 5000001 words of memory out of 5000000
 21354 multiletter control sequences out of 15000+600000
 6164 words of font info for 22 fonts, out of 8000000 for 9000
 775 hyphenation exceptions out of 8191
 34i,52n,37p,809b,1124s stack positions out of 5000i,500n,10000p,200000b,80000s
!  ==> Fatal error occurred, no output PDF file produced!

Thanks!

maieul / ledmac

Eledpar and non-arabic-regular-footnotes causes error #121