search

mak-gitdev / HA_enoceanmqtt

Home Assistant wrapper for enocean-mqtt (https://github.com/embyt/enocean-mqtt)
GNU General Public License v3.0
54 stars 14 forks source link

D2-01-01 does not report switch, only states #97

Closed albenoit closed 8 months ago

albenoit commented 8 months ago

The problem

Hi, thank you for the last update on this nice project.

You added support for D2-01-01 but on home assistant, the switch seems not available, one just sees the 'last_seen' state and cannot act on the switch nor see the switch state.

On HA, here is the description i get (with xxxxx on my ids):

state_topic: enoceanmqtt/light value_template: '{{ value_json.RSSI }}' unit_of_measurement: dBm device_class: signal_strength entity_category: diagnostic unique_id: enocean_D20101_xxxxxxxxx_xxxxxxxxx_rssi name: e2m_light_rssi device: name: e2m_light identifiers: xxxxxxxxxx model: D2-01-01 @xxxxxxxxxxx manufacturer: EnOcean configuration_url: http://tools.enocean-alliance.org/EEPViewer/profiles/D2/01/01/D2-01-01.pdf platform: mqtt

I am open for testing, thanks.

What type of installation are you running?

Docker

What version of HA_enoceanmqtt has the issue?

ha_enoceanmqtt_dev-aarch64

What was the last working version of HA_enoceanmqtt?

none for D2-01-01, this is a new feature

What type of Home Assitant installation are you running?

Home Assistant Container

Anything in the logs that might be useful to solve the issue? (Strongly recommended if applicable)

Home assistant log actually only find the last_seen and rssi sensors:

2023-11-17 14:34:15.572 INFO (MainThread) [homeassistant.components.mqtt.discovery] Found new component: sensor enocean_D20101_xxxxxx_yyyyy_rssi
2023-11-17 14:34:15.608 INFO (MainThread) [homeassistant.components.mqtt.discovery] Found new component: sensor enocean_D20101_xxxxxx_yyyyy_last_seen

Additional information

No response

mak-gitdev commented 8 months ago

Hi @albenoit,

Oops ! :sweat_smile: Not an issue, just that the docker image has not been generated for version 0.1.27 which adds support for D2-01-01. The current docker image is based on 0.1.26.

I will push the docker image for 0.1.27 tonight or this weekend. I should set a Github workflow to handle that automatically.

albenoit commented 8 months ago

Perfect, thanks, i will enjoy testing!

mak-gitdev commented 8 months ago

Hi @albenoit,

Docker images just pushed for amd64, aarch64 and armhf.

Please let me know if you have any issues with the new image.

albenoit commented 8 months ago

Hi, just tested, First, yes, the device now reports the switch behaviors and integration into HA is ok with 2 sets ofbuttons, one (activated with the storm lightning logo) avec the classical switch slider that is deactivated(gray). However, this switch and the other one (nodeon in-wall switch) that worked before now do not respond to HA commands, no ON/OFF actions. I am not familiar with this but, looing at:

Tell me if i can report/test on something else. Thanks for this work

mak-gitdev commented 8 months ago

Hi @albenoit,

You should only have one switch to control the output state of your module and you should not have entities ending with _2. It seems something went wrong in the HA registry.

Try this:

albenoit commented 8 months ago

Hi again, perfect recipe, it works like a charm ! thanks!