[New device request] Fairland Full Inverter Pool Heat Pump

make-all / tuya-local

Local support for Tuya devices in Home Assistant

MIT License

1.2k stars 487 forks source link

[New device request] Fairland Full Inverter Pool Heat Pump #222

Closed VoyteckPL closed 1 year ago

VoyteckPL commented 2 years ago

Hi, The heat pump for 15-30m3 pools - Fairland Inverter Plus 6,5kW IPHCR15

https://sklepbasenowy.pl/produkt/fairland-iphcr15/

All options work. Please add this to integration:

https://pastebin.com/kss3N846

make-all commented 2 years ago

This config is almost identical to the GardenPAC config except hvac_action is changed to hvac_mode. Actually it is a bit strange that the pool heatpumps supported so far have read-only status that can indicate heating or cooling modes, but only an on/off switch, no way to explicitly control the heating or cooling state. I suspect that all the madimack/gardenpac/fairland heatpumps are actually controllable through dp 105, just that users until now have only been interested in using them to heat.

VoyteckPL commented 2 years ago

It says 105 is read only but you can change it without a problem. This config I provided works 100%.All options are working.

make-all commented 1 year ago

Included in 0.19.0 release

VoyteckPL commented 11 months ago

Please fix:

id: 106 name: temperature type: integer mapping:
- constraint: temperature_unit conditions:
  - dps_val: false range: min: 60 max: 115 range: min: 12 max: 45

min should be 12 (now it is 16) and it is not possible to set temp in range 12-16.