search

makerbase-mks / MKS-DLC32

MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5-inch touch color screen; it can realize fast engraving and WEB web pages. Control, mobile phone APP control and other functions.
https://www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
275 stars 109 forks source link

With SD card no conection via browser #345

Open andre1000 opened 1 year ago

andre1000 commented 1 year ago

Hello, I have a problem with my DLC32 v2. I have the actual firmware (v2.30). When I have no SD-card inside, than I can connect the DLC with my browser. When I put the SD-card inside, than no connection is possible. The MKS-DLC32 is working. Display is on and I can also connect the APP. The SD-card is 16GB FAT32 or 8GB FAT32. Any idea?

abinoer commented 1 year ago

There is no such situation on my side, nor have I received similar feedback. Can you change the firmware to make normal connection? Maybe you can try two TF cards instead

andre1000 commented 1 year ago

I have tested 3 different types of SD-Cards 256MB, 8GB and 16GB. -> The same failure I have tested the firmware 2.0.8/2.1.0/2.3.0 -> The same failure I have found one additional point. When I use the engrave button on the display "No SD Card" It is possible, that I have a defect on my board?

librarymark commented 1 year ago

I am facing the same issue. I am able to ping the unit at all times, but when I have any SD card in it, the webpage will not load. This is a bug that needs to be fixed.