search

makerbase-mks / MKS-DLC32

MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5-inch touch color screen; it can realize fast engraving and WEB web pages. Control, mobile phone APP control and other functions.
https://www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
288 stars 115 forks source link

80w laser doesn't work on dlc32 #422

Open Alireza-90 opened 1 year ago

Alireza-90 commented 1 year ago

Hello Recently I used a mks dlc32 for my laser but 80w laser module doesn't work with it Does anyone had this problem ? Any ideas what can be wrong with the module , wiring or anything else?

Plottmania commented 1 year ago

80 watts?

What kind of laser or what kind of laser module do we have? A diode laser with three cables: VCC / GND / Signal Then it depends on whether 12 volts or 24 volts!

If only 12 volts go into the DLC 32, only 12 volts come out for the laser. If 24 volts go in, the laser should also tolerate 24 volts! Maybe a 12 volt laser driver can handle 24 volts, but the mounted fan usually can't...then you have a little problem.

The laser mode is set in the GRBL: $32=1 (now the laser is active).

Any questions?

Alireza-90 commented 1 year ago

Thank you plottmania