search

makerbase-mks / MKS-DLC32

MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5-inch touch color screen; it can realize fast engraving and WEB web pages. Control, mobile phone APP control and other functions.
https://www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
256 stars 105 forks source link

pwm for Splindle #443

Open alhaddar opened 7 months ago

alhaddar commented 7 months ago

Hi I need digram pwm for spindel MKS DLC32

how to wiring

my regards

Oldie-driver commented 4 months ago

I assume, you want connectet a mach3 pwm spindle controler with own power for the spindle?

Over the limit switch connector is a 3 pin connector. If i remeber right, use only ttl and s, not voltage. V should be 12v or 24v, check before. S and ttl give a 5v pwm, can be used for mach3 interface as pwm signal. Check even the voltage, i wired it 18 month ago...

If more problems, i will see on my miller, but i will not stand up now and go to garage.