search

makerbase-mks / MKS-DLC32

MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5-inch touch color screen; it can realize fast engraving and WEB web pages. Control, mobile phone APP control and other functions.
https://www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
281 stars 112 forks source link

New Chalenge for Atomstack A10 v2 Firmware Upgrade for AirAssist #455

Open GrosBerto opened 8 months ago

GrosBerto commented 8 months ago

Hello,

On my Atomstack A10 V2, I would like update/upgrade the firmware for implement air assit. I think mainboard can to do. Because "Air Assit" is write on this one. But i think the original firmware is locked by Atomstack. When i test M8 or M7 for active air assit with Light-burn, nothing change. Output voltage of air assit pin stay at 12V. Main board is LS ESP32 V1.0 with M17901 write on back. You can see mainboard bellow.

I know Marlin mainboard i have already modify and make some 3D printer, make a CNC milling with Marlin mainboard. But this environment this new for me.

I found nothing similar for my update on web. Someone could help for this topic ? Some Ideas ?

Thanks in advance.

20240127_190113

20240203_175124

AreyouShura commented 6 months ago

Hi there, i had the same problem and I went by the other way. a brougth a 12v TTL relay module and connected it to the laser ttl output pin. so i have my air pump turned on when the laser is on. when i dont need an air assist i switch the relay off. Rude but it works.

GrosBerto commented 6 months ago

Hello, nice it's a good idea. I'm feel less alone with my trouble. But community is poor for this machine. I will think about your solution and maybe i do this. Or change motherboard, i will see.Thanks

DiogoMonteiro1992 commented 1 month ago

Hello, Sorry, I know this is not related to the topic, but could you send the original firmware for this board? I've already tried through support, but the firmware they send doesn't always work well. It's for an Atomstack A5 V2.

Thank you so much if you can share it.

AreyouShura commented 1 month ago

Hello,I don't know how to download the firmware from machine.15:35, 19 августа 2024 г., DiogoMonteiro1992 @.***>: Hello, Sorry, I know this is not related to the topic, but could you send the original firmware for this board? I've already tried through support, but the firmware they send doesn't always work well. It's for an Atomstack A5 V2. Thank you so much if you can share it.

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>