MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5-inch touch color screen; it can realize fast engraving and WEB web pages. Control, mobile phone APP control and other functions.
so when i install the firmware for the dcl32 v 2.0 everything works as it should. but when i try to run a file to be engraved it will do so from an odd angle and the x and y axis move together at all time even if i just try to say move it left or right it will also go forwards and backwards. ( if i just want to move the y axis the x engages simultaneously. if i install one of the older firmware it move as it should but the file get engraved inverted is their something im doing wrong or a parameter i need to change to fix this thank you in advance
so when i install the firmware for the dcl32 v 2.0 everything works as it should. but when i try to run a file to be engraved it will do so from an odd angle and the x and y axis move together at all time even if i just try to say move it left or right it will also go forwards and backwards. ( if i just want to move the y axis the x engages simultaneously. if i install one of the older firmware it move as it should but the file get engraved inverted is their something im doing wrong or a parameter i need to change to fix this thank you in advance