search

makerbase-mks / MKS-DLC32

MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5-inch touch color screen; it can realize fast engraving and WEB web pages. Control, mobile phone APP control and other functions.
https://www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
255 stars 105 forks source link

Schematic ou gerber file #469

Open greentocic999 opened 3 months ago

greentocic999 commented 3 months ago

Hi Everyone, i need to get a schematic ou gerber file of the mks-dlc32 V1.1 (LS ESP32 PRO V1.1). Grateful

killthekid commented 2 months ago

@greentocic999 - did you have success for the file? Currently i'm looking for a shematic of the PCB. Do you have any documents?

greentocic999 commented 2 months ago

I was unsuccessful, in fact. But what is your question, I can try to help you

De: Alex @.> Enviado: quinta-feira, 11 de abril de 2024 16:04 Para: makerbase-mks/MKS-DLC32 @.> Cc: greentocic999 @.>; Mention @.> Assunto: Re: [makerbase-mks/MKS-DLC32] Schematic ou gerber file (Issue #469)

@greentocic999https://github.com/greentocic999 - did you have success for the file? Currently i'm looking for a shematic of the PCB. Do you have any documents?

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-DLC32/issues/469#issuecomment-2050333067, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AVUXCYX6H7X44GH5QY5PGATY43NC5AVCNFSM6AAAAABFQQRKL2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJQGMZTGMBWG4. You are receiving this because you were mentioned.Message ID: @.***>

killthekid commented 2 months ago

I try to install a Limit switch for Z, as the pcb has a connector for it. On the custom configuration in fluidnc i can select a (gpio) port, which the limit switch is connected to. I don't know which port to chose... Also tried to measure/trace the signal pin on the pcb to the esp, without success.

greentocic999 commented 2 months ago

What's the version of your pcb?

killthekid commented 2 months ago

It's LS ESP32 V1.0 i thing about going on a MKS LS ESP32 PRO, any recommendations?