MKS Eagle is an integrated design version of Nano V3.0. It retains the functions of Nano V3, but intergrates 5 TMC2209 drivers on board with UART mode, and uses integrated heat dissipation and four-layer PCB optimization design.
We are regularly using MKS boards. Recently in one of the Eagle boards, we found one serious issue.
In the machine, the nozzle gap to the bed is around 10mm. In the screen, i set to 0.1mm and moved up. But the Z moved up 10mm and touched the nozzle. Please find the attached video for that - Z Move Up.
In another way, the nozzle is touching the bed. In the screen, I set it to 1mm and moved it down. But the Z moved down by 10mm.
Please find the attached video for that - Z Move down.
Hello all,
We are regularly using MKS boards. Recently in one of the Eagle boards, we found one serious issue.
In the machine, the nozzle gap to the bed is around 10mm. In the screen, i set to 0.1mm and moved up. But the Z moved up 10mm and touched the nozzle. Please find the attached video for that - Z Move Up.
In another way, the nozzle is touching the bed. In the screen, I set it to 1mm and moved it down. But the Z moved down by 10mm. Please find the attached video for that - Z Move down.
Please give us a solution
https://github.com/makerbase-mks/MKS-EAGLE/assets/16957075/0d2c77b6-56f4-4cb2-a3f5-23191cf61d21
https://github.com/makerbase-mks/MKS-EAGLE/assets/16957075/141cfcc1-9021-49d8-bdb7-0434f3c055b5