search

makerbase-mks / MKS-EAGLE

MKS Eagle is an integrated design version of Nano V3.0. It retains the functions of Nano V3, but intergrates 5 TMC2209 drivers on board with UART mode, and uses integrated heat dissipation and four-layer PCB optimization design.
https://www.aliexpress.com/item/1005003183498253.html?spm=a2g0o.store_pc_home.productList_8356958.pic_0
GNU General Public License v3.0
13 stars 2 forks source link

Problem with autolevel menu #2

Open marcelobsilva18 opened 2 years ago

marcelobsilva18 commented 2 years ago

When selecting autolevel, the machine does the autolevel using the bltouch but the menu doesn't jump into auto-leveling and doesn't jump intoBL-touch probe menu to set Zoffset. I followed your video on youtube and checked the details here on your github but I can't find the answer. Please help!

mks-viva commented 2 years ago

Like this: https://github.com/makerbase-mks/MKS-Robin-Nano-V3.X/issues/73

marcelobsilva18 commented 2 years ago

Yes I checked that (I have also commented on it) but I still don't get the menu for the z-offset after the autobedleveling is done. That solution just allows to override the settings on the machine, it doesn't work the same way. Is there any option missing from the configuration?

marcelobsilva18 commented 2 years ago

Like this: makerbase-mks/MKS-Robin-Nano-V3.X#73

Can you please tell me something about this? Do you need my configurations?

mks-viva commented 2 years ago

Your source code provide to me.

marcelobsilva18 commented 2 years ago

Here is my code: Marlin.zip

Jcm0724 commented 2 years ago

I've almost the same issue even define AUTO_BED_LEVELING_BILINEAR. No autolevel setting... I've done everything you've done but still nothing..no autolevel menu showing up.

just-trey commented 2 years ago

I have the same issue. It does not switch to the z offset menu. I do have the auto-level menu and it goes through and probes the bed, but in my previous marlin 1.x setup it would probe the bed, center the nozzle, bring it down to the z offset, then the z offset menu would appear. Also in the previous version, I had a z offset menu setting under more.. but I do not see it, Is there a way to get to this screen?

Smarthelpers commented 2 years ago

Did anyone found a solution? Why MKS don't help us with this problem?

Judsonian commented 2 years ago

Bump ....

Judsonian commented 1 year ago

For now you must use the firmware version 2.0 that is available through MKS (not the base Marlin). They've done some magic in the code to make it work.