search

makerbase-mks / MKS-GEN_L

MKS GEN_L is a powerful 3D printer control board with ATMEGA2560 and compatible with RAMPS. V2.1 version the motherboard integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC2209. It can be used after plugged in. No soldering or flying lead is required ...
https://es.aliexpress.com/item/32802151924.html?spm=a219c.12010612.8148356.1.e4d93944s4tYDC
192 stars 50 forks source link

Lack of jumper for Z+ on J13 #7

Closed lonelymyp closed 4 years ago

lonelymyp commented 4 years ago

To make sensorless parking on the Z axis, there is only a jumper to use Z_min on J13 MKS-GEN_L 2.1. But if this is a CoreXY printer, the bead is parked at the maximum height when Z_max is triggered. I had to connect the necessary contacts with a jumper wire.

The rest of the axes have jumpers for both the minimum and maximum.

makerbase-mks commented 4 years ago

I think! You can define Z diag to Z max pin

makerbase-mks commented 4 years ago

@lonelymyp Has this problem been solved?

lonelymyp commented 4 years ago

@makerbase-mks yes