As we all know, the Klipper firmware has the advantages of high printing speed, high precision, and the ability to use the web page to control the printer, etc. MKS PI is a high-end microcomputer board designed by makerbase to replace the Raspberry Pi for the convenience of 3D printing users to use the Klipper firmware. In terms of hardware, MKS PI has a powerful 4-core 64-bit SOC onboard, with 1GBytes of DDR3 memory, supports HDMI screen interface and PI-TS35 screen interface, provides Ethernet port, 3-channel USB interfaces (can be connected to a 3D printer main board, USB Wireless network card, USB camera, U disk, USB keyboard and mouse, etc.); In terms of software, Makerbase provides a complete Klipper firmware transplanted based on the Armbian desktop system, and directly supports klipperScreen. Users only need to download the image file provided by Makerbase, burn it to the TF card, without a lot of construction work, use the usb port or serial port to connect your main board, configure the parameters on the webpage, and you can use the Klipper firmware happily!
Current Behavior
Looks like 8.8.8.8 DNS server is hardcoded in the /etc/resolve.conf file and DNS record from DHCP is completely ignored. It gives some issue when local or ISP level DNS server must be used instead public one.
Expected Behavior
DNS record from DHCP response is used as primary name resolver. Perhaps is has sense to keep hardcoded google service as backup.
System Configuration
MKS PI v1.1 with MKS-PI-Armbian_22.05.0-linux_5.16.20-20220726 image
Current Behavior Looks like 8.8.8.8 DNS server is hardcoded in the
/etc/resolve.conffile and DNS record from DHCP is completely ignored. It gives some issue when local or ISP level DNS server must be used instead public one.Expected Behavior DNS record from DHCP response is used as primary name resolver. Perhaps is has sense to keep hardcoded google service as backup.
System Configuration MKS PI v1.1 with
MKS-PI-Armbian_22.05.0-linux_5.16.20-20220726image