search

makerbase-mks / MKS-PI

As we all know, the Klipper firmware has the advantages of high printing speed, high precision, and the ability to use the web page to control the printer, etc. MKS PI is a high-end microcomputer board designed by makerbase to replace the Raspberry Pi for the convenience of 3D printing users to use the Klipper firmware. In terms of hardware, MKS PI has a powerful 4-core 64-bit SOC onboard, with 1GBytes of DDR3 memory, supports HDMI screen interface and PI-TS35 screen interface, provides Ethernet port, 3-channel USB interfaces (can be connected to a 3D printer main board, USB Wireless network card, USB camera, U disk, USB keyboard and mouse, etc.); In terms of software, Makerbase provides a complete Klipper firmware transplanted based on the Armbian desktop system, and directly supports klipperScreen. Users only need to download the image file provided by Makerbase, burn it to the TF card, without a lot of construction work, use the usb port or serial port to connect your main board, configure the parameters on the webpage, and you can use the Klipper firmware happily!
GNU General Public License v3.0
113 stars 9 forks source link

problem with PI-TS35 #51

Open romandie opened 1 year ago

romandie commented 1 year ago

Hi, i have install klipper on my mks pi in a sidewinder x2 and the machine work. Klipper is good. But now i install a PI-TS35 and when i start my printer the screen is black. I change the screen, the connector but not work. Help me please, because i want to install klipper with mks pi in my 3 printers. Thanks

njsurf73 commented 1 year ago

having the same issue. brand new. mks pi powers up and loads. ts35 flashes a white screen and then goes black. connected a display to the hdmi and it displays the output. ts35 seems to be dead

lordwolf88 commented 1 year ago

same error: I've been using the mks pi + ts35 combo for a while, and then all of a sudden the display doesn't work, only the hdmi port. if I install the factory image again, it works, but my settings are lost