makerbase-mks / MKS-Power-Control

MKS PWC Power Monitoring auto power off Continued to Play Module automatically put off power detect 3D printer parts; MKS UPS12V/24V provide Z-AXIS move, the hight 20mm-200mm between
https://makerbase.aliexpress.com/store/group/Power-Control/1047297_516890609.html?spm=a2g0o.store_home.pcShopHead_8325768.1_2_2
GNU General Public License v3.0
24 stars 3 forks source link

Printer doesn't boot when inserted fans into 12/24V connectors #2

Closed artem9 closed 4 years ago

artem9 commented 4 years ago

Today I installed the MKS PWC module into my 3D printer - TwoTrees Sapphire Pro. It has a mainboard MKS Robin Nano V1.2. I also made a fork from your "MKS Marlin 2.0 Firmware" repo, this is a configuration that I compiled and installed - https://github.com/artem9/Mks-Robin-Nano-Marlin2.0-Firmware/tree/sapphire-pro. Printer with this configuration can turn on/off (works as usual), but when I try to connect fans to the motherboard - it doesn't turn on anymore. This is the final build result - https://photos.app.goo.gl/SfETfBV3voTCGtVj6

makerbase-mks commented 4 years ago

I think, you need to press and hold the switch for a while, wait for the motherboard to boot, everything will be normal

mks-viva commented 4 years ago

Is this problem solved?

mks-viva commented 4 years ago

I will close this question temporarily.