search

makerbase-mks / MKS-Power-Control

MKS PWC Power Monitoring auto power off Continued to Play Module automatically put off power detect 3D printer parts; MKS UPS12V/24V provide Z-AXIS move, the hight 20mm-200mm between
https://makerbase.aliexpress.com/store/group/Power-Control/1047297_516890609.html?spm=a2g0o.store_home.pcShopHead_8325768.1_2_2
GNU General Public License v3.0
24 stars 3 forks source link

what does the MKS PWC 3.0 do in case of Power loss? #3

Closed nictronik99 closed 3 years ago

nictronik99 commented 4 years ago

What is the PWC capable of doing in the event of a power loss? Is it able to save the position if I enable Power loss recovery in Marlin that does not save the position on the SD layer by layer?

nictronik99 commented 4 years ago

Can anyone answer? The question is quite simple! @makerbase-mks

makerbase-mks commented 4 years ago

Hi! MKS PWC does not affect the power loss function.

nictronik99 commented 3 years ago

But can't I use the pwc module with the ups module?

makerbase-mks commented 3 years ago

Because MKS PWC and MKS UPS has detect function, for example, if AC power loss when printing, MKS PWC PW_DET has signal, AC power off and then MKS UPS detect AC power loss, Z axis move...

mks-viva commented 3 years ago

@nictronik99 Is this problem solved?

nictronik99 commented 3 years ago

@nictronik99 Is this problem solved?

Yes, thanks