MKS RUMBA32 is modified in Aus3D RUMBA32 version and a powerful 32-bit 3D printer control board with STM32F446VET6 , The main frequency is 180MHZ. Support Marlin2.0 , support MKS LCD12864B/MINI12864/2004/12864, support MKS TFT24/28/32/35/70 Screens. The motherboard integrates 6 AXIS interface, integrates SPI / UART interface…
Hi, we are using MKS-RUMBA32 board. We have uploaded the latest Marlin to the board.
We are using MKS TFT3.5". Here also we have updated to the latest firmware. In the config.txt, we have enabled 'Babystepping'.
But when printing, when we give babystepping, it is halting the print. After that there is no movement.
We tried with M290 S0.1 also. For this also, it is freezing.
Anyone success with babystepping.
This babystepping is a big issue with all MKS boards. We got the same issues with almost every of MKS boards.
Only in Robin Nano boards it is working finely. (As TS35 is not having seperate firmware)