Flash without button press

makerbase-mks / MKS-RUMBA32

MKS RUMBA32 is modified in Aus3D RUMBA32 version and a powerful 32-bit 3D printer control board with STM32F446VET6 , The main frequency is 180MHZ. Support Marlin2.0 , support MKS LCD12864B/MINI12864/2004/12864, support MKS TFT24/28/32/35/70 Screens. The motherboard integrates 6 AXIS interface, integrates SPI / UART interface…

16 stars 15 forks source link

Flash without button press #7

Closed lorenzing closed 4 years ago

lorenzing commented 4 years ago

Hi, I ask you if I can flash the board without pressing the boot and reset keys, since the card is in an awkward position in the printer. Thank you very much for helping.

Lorenzo

makerbase-mks commented 4 years ago

Hi! @lorenzing This motherboard is a continuation of the original version of the function, currently only this way, we are sorry for this!

leseaw commented 4 years ago

if you use Marlin-Kimbra, you don't need it anymore. There's an extra command for boot mode.

makerbase-mks commented 4 years ago

Yes, unless there is a bootloader