search

makerbase-mks / MKS-Robin-E3-E3D

MKS Robin E3 E3D 32Bit Control Board 3D Printer parts with tmc2209 Uart mode driver For Creality Ender 3 CR-10
https://www.aliexpress.com/item/4000781744682.html
GNU General Public License v3.0
117 stars 99 forks source link

Cooling Fan 100% all the time #169

Open kjanek opened 2 years ago

kjanek commented 2 years ago

The cooling fan shorted out on my E3D v1.1 most probably the cooling fan MOSFET most probably dead caus it's working all the time at 100%. Can I change it or somehow fix the fan? Thanks

pauloeduardogodoy commented 2 years ago

If you tried to install a crapy step down to use a 12V fan like I did, yes you killed the SMD transistor.

It is possible to replace, but you need to find the correct part to buy and need an SMD soldering station... Almost impossible to do it with a basic soldering iron.

kjanek commented 2 years ago

If you tried to install a crapy step down to use a 12V fan like I did, yes you killed the SMD transistor.

It is possible to replace, but you need to find the correct part to buy and need an SMD soldering station... Almost impossible to do it with a basic soldering iron.

I have not added a crappy step down. I had a 24V fan that had a little crappy connector and short cable. And throw one print the connector cables were pulled from connector and they shorted out. But still i think it made the same result as your issues. So basically the board needs a exchange :(

CrazyMark493 commented 1 year ago

i got the same problem it was the sot-23 package mosfet died buy some AO3400 mosfet with“A08K”on it and replace it

CrazyMark493 commented 1 year ago

i did it with only a crappy soldering iron

Sylwester79 commented 4 months ago

Isn't it connected to the wrong output?