search

makerbase-mks / MKS-Robin-E3-E3D

MKS Robin E3 E3D 32Bit Control Board 3D Printer parts with tmc2209 Uart mode driver For Creality Ender 3 CR-10
https://www.aliexpress.com/item/4000781744682.html
GNU General Public License v3.0
118 stars 97 forks source link

I can't update .bin file #2

Closed JordiKoki closed 4 years ago

JordiKoki commented 4 years ago

I am trying to update my new MKS Robin E3D board, but when I add the file Robin_e3.bin in my SD, the screen does not execute the update.

makerbase-mks commented 4 years ago

Hi!

  1. What screen are you using?
  2. Robin E3 / E3D already have firmware. If you have not modified the firmware, you can use it directly on the Ender3 machine without upgrading
  3. Robin E3 / E3D supports LCD12864 to display the firmware update progress
JordiKoki commented 4 years ago

I use a TFT35 V1.0 (with Firmware 1.0.5) in my CR10s, but doesn't works anything (hotend, bed, moves, fans...)

makerbase-mks commented 4 years ago

Hi! You can refer to it and link is : https://github.com/makerbase-mks/MKS-Robin-E3-E3D/wiki/Upgrade-with-MKS-TFT-Series

spooky79 commented 3 years ago

I have the same problem, it comes to 100% and nothing is happening, I'm using visual studio code, any solution?

aspaixao commented 3 years ago

I have the same with my e3d and I using a CoreXY and configuration to ender 6

sergiofagundes commented 3 years ago

FIXED 100% working:

the board if using a 4GB sdcard, I tried with 8GB/16GB/32GB and none of them worked. So I tried a 4GB sdcard and it worked.

I used the Sdcard on the LCD sdcard slot, but I think it should work also in the mks robin board sdcard slot also with only 4GB sdcard.

The sdcard I used that worked: 4GB SanDisk Class 4 HC The sdcars I used that didn't work: 8GB/16GB/32GB generic Class 10 HC