search

makerbase-mks / MKS-Robin-E3-E3D

MKS Robin E3 E3D 32Bit Control Board 3D Printer parts with tmc2209 Uart mode driver For Creality Ender 3 CR-10
https://www.aliexpress.com/item/4000781744682.html
GNU General Public License v3.0
118 stars 97 forks source link

Robin_E3D-doesn't_update #27

Closed TxasMan3D closed 4 years ago

TxasMan3D commented 4 years ago

Robin_E3D+tft35 v1.0 Using VSCode to generate an updated Robin_e3.bin file. I save it in the MicroSD card and put it in the TF slot of the motherboard. When I repower the printer, board doesn't update with new file Looks like the eeprom is disabled but, how can i enable it without comunication with the board?

makerbase-mks commented 4 years ago

You can try to change TF card or format it. Can you provide your motherboard updating picture?

TxasMan3D commented 4 years ago

I have used two different TF cards and my pc has no problems to read them. Yes, of course. I will send you by email the whole folder with the updated firmware.

TxasMan3D commented 4 years ago

Due to the size of the folder i can’t send it so i send you the updated “firmware.bin” file that is located in .pio/build/mks_robin_e3. The name of the file was changed to “Robin_e3.bin”.

Enviado desde Correohttps://go.microsoft.com/fwlink/?LinkId=550986 para Windows 10

De: makerbasemailto:notifications@github.com Enviado: miércoles, 5 de agosto de 2020 3:17 Para: makerbase-mks/MKS-Robin-E3-E3Dmailto:MKS-Robin-E3-E3D@noreply.github.com CC: TxasMan3Dmailto:adicto_al_snow@hotmail.com; Authormailto:author@noreply.github.com Asunto: Re: [makerbase-mks/MKS-Robin-E3-E3D] Robin_E3D-doesn't_update (#27)

You can try to change TF card or format it. Can you provide your motherboard updating picture?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-Robin-E3-E3D/issues/27#issuecomment-668915133, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQP6VC4VZZ2EJ7BIRG4LKPLR7CXLTANCNFSM4PULNBLA.

makerbase-mks commented 4 years ago

No! You need copy Robin_e3.bin file to tf card, doesn't firmware.bin rename Robin_e3.bin You can download MKS Robin E3-E3D path Robin_e3.bin file update

TxasMan3D commented 4 years ago

I had downloaded that one also but i have a bmg extruder fitted and i changed the steps in the firmware to get them saved in the motherboard, otherwise my problem has been fixed. I thought that the file that need to be copied was firmware.bin. I have try with the Robin_e3 one and looks like it has been read. Thank you!