search

makerbase-mks / MKS-Robin-E3-E3D

MKS Robin E3 E3D 32Bit Control Board 3D Printer parts with tmc2209 Uart mode driver For Creality Ender 3 CR-10
https://www.aliexpress.com/item/4000781744682.html
GNU General Public License v3.0
118 stars 97 forks source link

3D touch failure #33

Closed bymanue closed 3 years ago

bymanue commented 4 years ago

Good afternoon I have a problem with 3d touch, it is connected without problems to the printer. At the time of doing the test it goes down a first time and it does not fail, but it repeats a second time slower and it fails me randomly at that point. It is connected to the Z limit switch. I have tried the default firm that comes in Github MKS for cr 10 and it also gives me errors. Thank you

makerbase-mks commented 4 years ago

MKS Robin E3-E3D path Robin_e3.bin file have not config 3D TOUCH function, you need download source code and setting and build, about config 3D TOUCH, you can refer to Wiki :https://github.com/makerbase-mks/MKS-Robin-E3-E3D/wiki/3D_TOUCH

KiZDGGit commented 4 years ago

Same here. G29 sometimes finishes fine, but other fails and doesn't stop at the second down, so it's very erratic and completely unusable.

MKS Robin E3-E3D path Robin_e3.bin file have not config 3D TOUCH function, you need download source code and setting and build, about config 3D TOUCH, you can refer to Wiki :https://github.com/makerbase-mks/MKS-Robin-E3-E3D/wiki/3D_TOUCH

If fails at second time, I suppose it's not "stock" firmware; mine is not.

Any idea?

makerbase-mks commented 4 years ago

@KiZDGGit Can you upload config file?

bymanue commented 4 years ago

KiZD is my neighbour, he is at work now; we've been using the same settings (and same troubles)

Configuration_adv.txt Configuration.txt

thank you

makerbase-mks commented 4 years ago

You can refer to branch: https://github.com/makerbase-mks/MKS-Robin-E3-E3D/tree/ender3-3d-touch