makerbase-mks / MKS-Robin-E3-E3D

MKS Robin E3 E3D 32Bit Control Board 3D Printer parts with tmc2209 Uart mode driver For Creality Ender 3 CR-10
https://www.aliexpress.com/item/4000781744682.html
GNU General Public License v3.0
118 stars 97 forks source link

Can not Open build_flags.py #4

Closed Frederic-SABU closed 4 years ago

Frederic-SABU commented 4 years ago

I can not compile a Marlin-2 for a ROBIN E3D. I am using VS studio and Platformio. My config is working fine for my other MKS boards : SGEN_L and MKS_BASE. Error message is : D:\Python38\python.exe: can't open file 'Marlin/src/HAL/HAL_STM32F1/build_flags.py': [Errno 2] No such file or directory Thks for any help.

makerbase-mks commented 4 years ago

What you set in the platformio.ini file is: mks_robin_e3d?

Frederic-SABU commented 4 years ago

Yes, it is but the problem was coming from one of he marlin file. I reused a Marlin 2 from my SGEN_L cards and it is not compatible.

Thk a lot for following up.

Rgds, Frd

What you set in the platformio.ini file is: mks_robin_e3d?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin-E3-E3D/issues/4#issuecomment-623219657, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMBE255BMSBE5MTEIUOMZLTRPYKFJANCNFSM4MXL7J2A.

Frederic-SABU commented 4 years ago

No sorry it is :

mks_robin_e3

as there is no e3d environment.

Rgds, Frd

Le 04/05/2020 08:19, MSABU a écrit :

Yes, it is but the problem was coming from one of he marlin file. I reused a Marlin 2 from my SGEN_L cards and it is not compatible.

Thk a lot for following up.

Rgds, Frd

What you set in the platformio.ini file is: mks_robin_e3d?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin-E3-E3D/issues/4#issuecomment-623219657, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMBE255BMSBE5MTEIUOMZLTRPYKFJANCNFSM4MXL7J2A.