search

makerbase-mks / MKS-Robin-Nano-V1.X

MKS Robin Nano is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support MKS Robin TFT24/28/32/35/43 touch Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 1 MAX31855.The motherboard integrates After shutdown. Support MKS Robin WIFI for cloud printing and supports firmware update by SD card…
https://www.aliexpress.com/item/33013776323.html?spm=2114.12010612.8148356.5.320565f4m9CS1x
197 stars 75 forks source link

Firmware v2.x.x for nano + tft32 #11

Open artdezigner opened 4 years ago

artdezigner commented 4 years ago

Hello, please tell me, the firmware v.2.x.x will be for Robin nano v1.1 + TFT 32? Can I use v2.0.0 firmware for Nano+tft 35 for my configuration?

And second question: does the pin of coldend fan work automatically in firmware v1.0.4?

mks-viva commented 4 years ago

Hi!

  1. firmware v2.x.x default is Nano+Robin TFT35
  2. This FAN is in the printing process, it will be automatically turned on after the first layer printing is completed
artdezigner commented 4 years ago

please tell me when the firmware for Nano+TFT 32 will be made?

duyleekun commented 4 years ago

I'm using the tft24, where to change the config?

mgcrea commented 4 years ago

@mks-viva I've seen that there is a Robin-TFT32 git branch on the firmware repository, would this branch work with a TFT32 or is it still work in progress?