search

makerbase-mks / MKS-Robin-Nano-V1.X

MKS Robin Nano is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support MKS Robin TFT24/28/32/35/43 touch Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 1 MAX31855.The motherboard integrates After shutdown. Support MKS Robin WIFI for cloud printing and supports firmware update by SD card…
https://www.aliexpress.com/item/33013776323.html?spm=2114.12010612.8148356.5.320565f4m9CS1x
197 stars 76 forks source link

Wifi not work in 1.0.3 and later #34

Open Spider84 opened 4 years ago

Spider84 commented 4 years ago

Wifi not work in 1.0.3 and later Always SSID = TP-LINK_MKS and Disconnected. No reaction to config file. No Wifi version in About.

makerbase-mks commented 4 years ago

Can you provide your config file?

Spider84 commented 4 years ago

robin_nano_cfg.txt Last work version is 1.0.2 - work fine.

Engi23 commented 4 years ago

i use Mks_Nano35_V2.0.3.1 Release file.rar and wifi works

Spider84 commented 4 years ago

I can't use nano35, I have TFT 3.2 display :(

mks-viva commented 3 years ago

@Spider84 Has this problem been resolved?

X-Ryl669 commented 3 years ago

Doesn't seem so.

Spider84 commented 3 years ago

@mks-viva no :(

mks-viva commented 3 years ago

@mks-viva no :(

I suggest that you can update to a new version of firmware or use 2.0.x DIY firmware.