search

makerbase-mks / MKS-Robin-Nano-V3.X

Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.
GNU General Public License v3.0
136 stars 65 forks source link

Robin nano v3.1 BL Touch failure #106

Open Barackazarc opened 2 years ago

Barackazarc commented 2 years ago

Hello!

I have an issue with this board and antclab bl touch 3.1 (https://www.antclabs.com/bltouch-v3).

When I try to plug it in and power up the board, the BL Touch literally does nothing. I have checked and the wire that is okay. I have meassured it in multimeter. Basically when powering on the board the BL Touch does not test itself. Nothing happening.

Any idea how to solve this? I thought it is much easier but it seems I'm having hard time to use this.

Also forgot to mention that I'm running klipper on that board.

Thanks in advance.

MKS-hosiey commented 2 years ago

The sensor will self-test when it is powered on. It does not self-test. You can contact the seller of the sensor. There should be a problem with the sensor.

mdunfee3016 commented 2 years ago

Verify your wiring connections. This will usually happen if the wires are not connected in the correct order. ALso, what pins are you connecting to?