the babystep does not respond to the press

makerbase-mks / MKS-Robin-Nano-V3.X

Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.

GNU General Public License v3.0

136 stars 65 forks source link

the babystep does not respond to the press #121

Closed sima35 closed 2 years ago

sima35 commented 2 years ago

I have set everything according to your manual. Everything also works according to your manual except babysteping. I have a 3dtouch there, MKS pwc, MKS fes 2x, everything goes like me. The problem is that it doesn't respond when I click to move Z up or down, it doesn't move.

MKS-hosiey commented 2 years ago

Do you have babystep enabled in your config file? Are you updating the firmware on our github?

sima35 commented 2 years ago

Yes, I have babystep allowed. I did use marlin 2.1 original. MKS Marlin restarted itself after building and TFT_LVGL_UI made us a problem from the screen, which I have already solved at your place. That's why I chose a clean Marlin that works, only the babystep for some reason doesn't want to respond