search

makerbase-mks / MKS-Robin-Nano-V3.X

Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.
GNU General Public License v3.0
138 stars 67 forks source link

Robin Nano V3 rev 004 + display H43 + USB stick NOT start #60

Closed spammchik closed 2 years ago

spammchik commented 2 years ago

Configuration: Robin Nano V3 rev 004 + display H43 V1.0 or V1.1 + USB stick Problem: If you connect a USB drive to the Robin Nano V3 rev 004 and turn on the power via USB or 12V, the electronics will not boot, display not work. Everything works fine without a USB stick. If you plug in the USB stick after the electronics turn on, then everything works fine. If there is no display H43, then the electronics starts with a USB drive fine. This problem is not present on Robin Nano V3 rev 003. Question: How to make the electronics Robin Nano V3 rev 004 + display H43 V1.0 or V1.1 boot and work with the USB drive connected?

mks-viva commented 2 years ago

Hi! I want to know, you use same the firmware on 003 and 004?

spammchik commented 2 years ago

The firmware is the same for 003 and 004.

mks-viva commented 2 years ago

004 hardware changes image

KORSiRO commented 2 years ago

Hi look this : https://github.com/makerbase-mks/MKS-Robin-Nano-V3.X/issues/76 I managed to find the solution after hours of testing;)