makerbase-mks / MKS-Robin-Nano-V3.X

Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.

GNU General Public License v3.0

141 stars 69 forks source link

Board reboot with any USB stick #72

Open ImmortalTeknik opened 2 years ago

ImmortalTeknik commented 2 years ago

Under LVGL UI with lastest firmware version, as soon as I plug any USB stick, the board freeze and reboot, so I can't print from USB.

For information, I use: mks_robin_nano_v3_usb_flash_drive

define USB_FLASH_DRIVE_SUPPORT

define MULTI_VOLUME

SD card is read, but not USB stick. I tried with 5 USB sticks. I also tried with Color UI, problem remain, its says USB start failed.

What did I miss ?

mks-viva commented 2 years ago

What firmware version you using?

btnkalyoncu commented 2 years ago

I have the same issue. Could you tell me how you solved it?

Ertil-Noorison commented 2 years ago

I use Mks-Robin-Nano-Marlin2.0-Firmware. CONFIGURATION_H_VERSION 02000901 Board Robin-Nano-V3.1 + TS35-V2. USB and SD work well. USB and SD work well. in the firmware, set version from "mks_robin_nano_v3_usb_flash_drive"