search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
131 stars 129 forks source link

MKS-Robin version 1.0 firmware update with PID enabled (SOLVED) #1

Closed 3Dangel closed 4 years ago

3Dangel commented 7 years ago

Dear MKS,

I saw that we have updated with V2.01 firmware with the PID to better control the hotend.

would you please upload for the v1.01 's ? thanks

Robert

makerbase-mks commented 7 years ago

hi,you can use V2.0.1, it is the newest

3Dangel commented 7 years ago

Thanks!!! I received V 1.0.2 From your company. My board is the first batch V1.0

Would you be able to upload the v1.0.2?

It will correct the PID temperature control to +-0.8C!!!

Also, there are two extra 12/24 V socket. How could I control them to enable for second fan and LED light?

Thanks a lot!!!

Robert

makerbase-mks commented 7 years ago

Hello, the V1.0.2 version firmware has been uploaded to Gihub. The extra 12V/24V on the controller board was brought from the power supply, so it is uncontrolable.

3Dangel commented 7 years ago

Great news for other users!!! Thanks for uploading. Others has confirmed that it is working great for the PID!!

Is the WIFI module need to be set with special setting ? I bought the MKS- WIFI module and would like to set it up with Robin board. 在這裡先祝福你們新年快樂萬事如意！ 倪憲伯 ( Robert)

devvratsompura commented 7 years ago

How to print over wifi? it is showing error. i have used mks-robin version (1.0.1) English.