search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
130 stars 129 forks source link

Makerbase Robin 2 Marlin Problem #108

Open Onuryagci opened 5 years ago

Onuryagci commented 5 years ago

I need help. Mks robin 2 motherboard is not loading marlin firmware. Please help me. You certainly have knowledge. I'm good with apps. Tell me what to do, please. Thank you.

Onuryagci commented 5 years ago

Marlin and TMC 5160 Driver problem... Not moving motors. As if the drives were not plugged in.

DaVincIan commented 5 years ago

Onuryagci

You are providing very little information. Are you using a Robin2 controller or a Robin V2 controller I assume you managed to flash the controller with Marlin 2 FW. If so, to start with go through the Configuration.h file to make sure it the defines match your printer configuration.

3Dangel commented 5 years ago

There is a section that you need to select what driver you are using. Not sure if your driver is supported or not. Most likely yours is not that popular one. Cheers

Ian Veldman notifications@github.com於 2019年8月22日 週四，14:37寫道：

Onuryagci

You are providing very little information. Are you using a Robin2 controller or a Robin V2 controller I assume you managed to flash the controller with Marlin 2 FW. If so, to start with go through the Configuration.h file to make sure it the defines match your printer configuration.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/108?email_source=notifications&email_token=AFYWWXKYJ7GTBO7HR4HTOJ3QFYXYXA5CNFSM4IBNOU7KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD44BRVI#issuecomment-523770069, or mute the thread https://github.com/notifications/unsubscribe-auth/AFYWWXNPSH2KY43I5ILZ633QFYXYXANCNFSM4IBNOU7A .