search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
130 stars 129 forks source link

Hi makerbase, is there any PWM free pins are available in MKS Robin stm32 ? #116

Open github051 opened 5 years ago

github051 commented 5 years ago

Hi makerbase, is there any PWM free pins are available in MKS Robin stm32 ? Can any one help me on this ?

jfkerekes commented 5 years ago

I am wondering the same thing for the Robin MINI... want to know if pin PB2 can be used for BLTouch control.

escknx commented 4 years ago

No response? Hows that no possible to use BLTouch on Marlin32board?

zillarob commented 4 years ago

Look at the data sheet for the chip on your board to see what pins do what, then look at the schematic to figure what pins are free, or can be freed up.

makerbase-mks commented 4 years ago

MKS Robin hardware is open source, you can refer to: https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware

3Dangel commented 4 years ago

Glad to see MKS is responding to the questions. Pls keep it coming.

My MKs-Robin v2.1 with WIFI module can not get the Marlin 2 to work. It complies correctly. But no LCD screen after FW being flashed in. It stays on updating. Even after pressing reset button It restart but the lcd only shows “booting”. The version on mks-GitHub of Marlin is old and does not support mixing dual color. Would you be able to test at your end? and find out what is wrong and what are the fixes?

Thanks in advance for your help

Robert

On Fri, Oct 11, 2019 at 02:02 makerbase notifications@github.com wrote:

MKS Robin hardware is open source, you can refer to: https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/116?email_source=notifications&email_token=AFYWWXJORZAE32RLXLJ7A6DQOAXKVA5CNFSM4IJJRSFKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEA7GKGI#issuecomment-540960025, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFYWWXKRUFNRYQXDWA5NGDLQOAXKVANCNFSM4IJJRSFA .

makerbase-mks commented 4 years ago

Currently, Marlin 2.0 firmware does not support MKS Robin WIFI.