TFT35 MKS-Robin Nano white Display

[Princore]

I flashed Marlin 2.0 and on the Robin Nano 1.1 and also the MKS Robin TFT35 V1.0 Firmware for the Display. After Booting the display keeps white and nothing happens. Connecting to the MKS Robin Nano with pronterface works. Do I have to set something else in Marlin?

[Technology89]

Okay it's the same. Image only in top left corner.

[zillarob]

That other tft showed up and works the same as my other one does. There was a version number on there that I cant remember of the top of my head, but they were the same. Only difference was one had a black metal retainer for the screen, the other had a shiny chrome-like one.

[pcopa]

I also had the dreaded white screen, but after a lot Research and help from the German forum https://drucktipps3d.de/forum/topic/schon-gesehen-sapphire-s-pro/?part=24 , I was able to compile a set of files that reset the Sapphire-Pro printer to the latest revision (for me).

1. Just add the unzipped files to an empty micro-SD card.
2. Switch printer off
3. Insert micro-SD card
4. Switch printer back on and let the update do its work.

TFT35_V1.0.2 Sapph-Pro191002.zip

[sobieh]

Hello. Any idea where can i download the original mks robin nano firmware (closedsource) v1.0.3 ? My printer was rerporting such version in About and i would like to be able to restore it after failed marlin 2,0 attempts.

[3Dangel]

Did you try the 2.03? It might be compatible. Alternatively, you may want to try the branch of Marlin by jmz52

But the one at GitHub from MKS would work.

What are the things that it did not work?

On Fri, Oct 4, 2019 at 16:44 sobieh notifications@github.com wrote:

Hello. Any idea where can i download the original mks firmware (closedsource) v1.0.3 ? My printer was rerporting such version in About and i would like to be able to restore it after failed marlin 2,0 attempts.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/124?email_source=notifications&email_token=AFYWWXK7YHIZRSGQUBRHRNLQM7BNTA5CNFSM4IRKEDJKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEANCBPQ#issuecomment-538583230, or mute the thread https://github.com/notifications/unsubscribe-auth/AFYWWXIYQQELAWXUMJXOODTQM7BNTANCNFSM4IRKEDJA .

[3Dangel]

I found V1.02 in my gmail folder. If you still need it, let me know

On Fri, Oct 4, 2019 at 18:17 Robert Ni nirobert@gmail.com wrote:

Did you try the 2.03? It might be compatible. Alternatively, you may want to try the branch of Marlin by jmz52

But the one at GitHub from MKS would work.

What are the things that it did not work?

On Fri, Oct 4, 2019 at 16:44 sobieh notifications@github.com wrote:

Hello. Any idea where can i download the original mks firmware (closedsource) v1.0.3 ? My printer was rerporting such version in About and i would like to be able to restore it after failed marlin 2,0 attempts.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/124?email_source=notifications&email_token=AFYWWXK7YHIZRSGQUBRHRNLQM7BNTA5CNFSM4IRKEDJKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEANCBPQ#issuecomment-538583230, or mute the thread https://github.com/notifications/unsubscribe-auth/AFYWWXIYQQELAWXUMJXOODTQM7BNTANCNFSM4IRKEDJA .

[zillarob]

Id throw an SKR v1.3 or even a Gen L in long before I put that awful fw back on.

I dont know if you use e1 for autofan, but I played hell finding one that had it enabled again after playing with fw from this repo.

[3Dangel]

I agree with you. Old Robins are very limited.

But I still run it on v1.03 for my Zonestar M802 acrylic frame. And has not failed me yet.

I have another Robin v 2.1 that either will be running on Marlin2 ( cross finger that most of the functionality will run) Or just buy a SKR 1.3 ( but still have 2 MKs-Sbase V1.3 in the box for years now.

On Fri, Oct 4, 2019 at 18:33 zillarob notifications@github.com wrote:

Id throw an SKR v1.3 or even a Gen L in long before I put that awful fw back on.

I dont know if you use e1 for autofan, but I played hell finding one that had it enabled again after playing with fw from this repo.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/124?email_source=notifications&email_token=AFYWWXKNRF23PSK76RLCAQLQM7OHLA5CNFSM4IRKEDJKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEANGDDA#issuecomment-538599820, or mute the thread https://github.com/notifications/unsubscribe-auth/AFYWWXLWDCF6FIUQJQ2DTKTQM7OHLANCNFSM4IRKEDJA .

[zillarob]

SKR v1.3 will be drop in for a Nano (maybe Mini too), same size and screws. Id throw BigTreeTech some love because they do good stuff and have always released info on their products. All the info that MKS has released recently is trying to catch up to them. If you compare the 2 githubs, its like MKS used the BTT github as a template =D

[pcopa]

@sobieh have you ried my

TFT35_V1.0.2 Sapph-Pro191002.zip It got me back to the original factory settings.

[napiglet]

Hello.. How can I add a Korean font? Can you share the code? The environment I'm testing... mks robin nano v1.2 / mks tft35

[lucas83-lee]

Hello.. How can I add a Korean font? Can you share the code? The environment I'm testing... mks robin nano v1.2 / mks tft35

i think it doesn't support korean language.