search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
129 stars 129 forks source link

MKS-Robin2 Err5 #151

Closed JanHH2019 closed 4 years ago

JanHH2019 commented 4 years ago

where can I find a list with the error codes? I have with my MKS Robin2 when heating the heating bed or the nozzle every now and then the "Err 5", but unfortunately I find nothing.

makerbase-mks commented 4 years ago

Robin2 error type

Err1: The thermal bed exceeds the maximum temperature limit. Please check whether the thermal interface is shorted. Err2: The print head exceeds the maximum temperature limit. Please check whether the thermal interface is shorted. Err3: The hot bed exceeds the minimum temperature limit. Please check whether the thermal interface is disconnected. Err4: The print head exceeds the minimum temperature limit. Please check whether the thermal interface is disconnected. Err5: Nozzle heating fails, if the nozzle does not reach the set temperature difference within the set time, an error is reported; please check the configuration file settings or check whether the power supply is sufficient; Err6: The heating bed fails to heat. If the heating bed reaches the set temperature difference within the set time, an error is reported; please check the configuration file settings or check whether the power supply is sufficient; Err7: thermal runaway; when the temperature rises to the target temperature, the current temperature is lower than the target temperature and exceeds the set temperature within the set time, an error is reported; please check whether the thermal sensitivity is normal or whether the PID value is appropriate.