search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
131 stars 129 forks source link

Robin mini extruder not turning #154

Open shivahegde opened 4 years ago

shivahegde commented 4 years ago

Hi, i got new issue extruder not turning while print. i have checked cable connection and it is correct.

makerbase-mks commented 4 years ago

You can refer to: https://github.com/makerbase-mks/MKS-Robin-mini/tree/master/marlin%20firmware

makerbase-mks commented 4 years ago

May be it is of pins_MKS_ROBIN_MINI.h pin define have conflict, you need check it of extruder's pin define, Like E0_ENABLE_PIN……

tedbeer commented 4 years ago

I had such issue. It was mechanical problem - a gear on a motor inside an extruder was loose. Use a hex key to tight a fixing screw.