search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
128 stars 129 forks source link

Robin2 update #182

Closed MsnSazabi closed 3 years ago

MsnSazabi commented 3 years ago

Hello, I'm trying to update my Robin2 to 1.0.3 (1.0.2 currently). I've copied all 2 files (bin, cfg and 2 folders) to sd card. Put sd in motherboard, launch it. But nothing happened. After 3 reboots it showed updating text on lcd. But menu About still shows 1.0.2. And printer doesnt react on manual movement except of homing (x/y only, z is weird). Tried to update again, but it just ignores files on sd card and boots normally.

3Dangel commented 3 years ago

Make sure your as is formatted on FAT32 and lesser than 16G. Usually a 8G works well

On Sun, Jul 26, 2020 at 10:52 MsnSazabi notifications@github.com wrote:

Hello, I'm trying to update my Robin2 to 1.0.3 (1.0.2 currently). I've copied all 2 files (bin, cfg and 2 folders) to sd card. Put sd in motherboard, launch it. But nothing happened. After 3 reboots it showed updating text on lcd. But menu About still shows 1.0.2. And printer doesnt react on manual movement except of homing (x/y only, z is weird). Tried to update again, but it just ignores files on sd card and boots normally.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/182, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFYWWXKZPZT3VJ5XIHU2NK3R5RNMLANCNFSM4PIB7X3A .

MsnSazabi commented 3 years ago

it was 16gb. Will check formatting. Thanks.

makerbase-mks commented 3 years ago

I temporarily close this question