quiret
commented
2 years ago Try this platformio.ini:
#
# Marlin Firmware
# PlatformIO Configuration File
#
# For detailed documentation with EXAMPLES:
#
# http://docs.platformio.org/en/latest/projectconf.html
#
# Automatic targets - enable auto-uploading
# targets = upload
#
# By default platformio build will abort after 5 errors.
# Remove '-fmax-errors=5' from build_flags below to see all.
#
[platformio]
src_dir = Marlin
build_dir = .pioenvs
lib_dir = .piolib
libdeps_dir = .piolibdeps
boards_dir = buildroot/share/PlatformIO/boards
default_envs = mks_robin
[common]
default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
build_flags = -fmax-errors=5
-g
-ggdb
lib_deps =
https://github.com/MarlinFirmware/U8glib-HAL/archive/dev.zip
LiquidCrystal@1.3.4
TMCStepper@<1.0.0
Adafruit NeoPixel@1.1.3
https://github.com/lincomatic/LiquidTWI2/archive/30aa480.zip
https://github.com/ameyer/Arduino-L6470/archive/master.zip
https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/files/8306697/TMC26XStepper.zip
#################################
# #
# Unique Core Architectures #
# #
# Add a new "env" below if no #
# entry has values suitable to #
# build for a given board. #
# #
#################################
#
# ATmega2560
#
[env:megaatmega2560]
platform = atmelavr
framework = arduino
board = megaatmega2560
build_flags = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
#
# ATmega1280
#
[env:megaatmega1280]
platform = atmelavr
framework = arduino
board = megaatmega1280
build_flags = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
#
# AT90USB1286 boards using CDC bootloader
# - BRAINWAVE
# - BRAINWAVE_PRO
# - SAV_MKI
# - TEENSYLU
#
[env:at90usb1286_cdc]
platform = teensy
framework = arduino
board = at90usb1286
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
extra_scripts = pre:buildroot/share/atom/create_custom_upload_command_CDC.py
monitor_speed = 250000
#
# AT90USB1286 boards using DFU bootloader
# - PrintrBoard
# - PrintrBoard Rev.F
# - ? 5DPRINT ?
#
[env:at90usb1286_dfu]
platform = teensy
framework = arduino
board = at90usb1286
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
extra_scripts = pre:buildroot/share/atom/create_custom_upload_command_DFU.py
monitor_speed = 250000
#
# Due (Atmel SAM3X8E ARM Cortex-M3)
#
# - RAMPS4DUE
# - RADDS
#
[env:DUE]
platform = atmelsam
framework = arduino
board = due
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
lib_ignore = c1921b4
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
monitor_speed = 250000
[env:DUE_USB]
platform = atmelsam
framework = arduino
board = dueUSB
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
lib_ignore = c1921b4
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
monitor_speed = 250000
[env:DUE_debug]
# Used when WATCHDOG_RESET_MANUAL is enabled
platform = atmelsam
framework = arduino
board = due
build_flags = ${common.build_flags}
-funwind-tables
-mpoke-function-name
lib_deps = ${common.lib_deps}
lib_ignore = c1921b4
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
monitor_speed = 250000
#
# NXP LPC176x ARM Cortex-M3
#
[env:LPC1768]
platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/master.zip
framework = arduino
board = nxp_lpc1768
build_flags = -DTARGET_LPC1768 -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
# debug options for backtrace
# -funwind-tables
# -mpoke-function-name
lib_ldf_mode = off
lib_compat_mode = strict
extra_scripts = Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
monitor_speed = 250000
lib_deps = Servo
LiquidCrystal
https://github.com/MarlinFirmware/U8glib-HAL/archive/dev.zip
TMCStepper@<1.0.0
[env:LPC1769]
platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/master.zip
framework = arduino
board = nxp_lpc1769
build_flags = -DTARGET_LPC1768 -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
# debug options for backtrace
# -funwind-tables
# -mpoke-function-name
lib_ldf_mode = off
lib_compat_mode = strict
extra_scripts = Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
monitor_speed = 250000
lib_deps = Servo
LiquidCrystal
https://github.com/MarlinFirmware/U8glib-HAL/archive/dev.zip
TMCStepper@<1.0.0
#
# Melzi and clones (ATmega1284p)
#
[env:melzi]
platform = atmelavr
framework = arduino
board = sanguino_atmega1284p
build_flags = ${common.build_flags}
upload_speed = 57600
lib_deps = ${common.lib_deps}
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
#
# Melzi and clones (Optiboot bootloader)
#
[env:melzi_optiboot]
platform = atmelavr
framework = arduino
board = sanguino_atmega1284p
build_flags = ${common.build_flags}
upload_speed = 115200
lib_deps = ${common.lib_deps}
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
#
# RAMBo
#
[env:rambo]
platform = atmelavr
framework = arduino
board = reprap_rambo
build_flags = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
#
# Sanguinololu (ATmega644p)
#
[env:sanguino_atmega644p]
platform = atmelavr
framework = arduino
board = sanguino_atmega644p
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
#
# Sanguinololu (ATmega1284p)
#
[env:sanguino_atmega1284p]
platform = atmelavr
framework = arduino
board = sanguino_atmega1284p
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
#
# STM32F103RE
#
[env:STM32F1]
platform = ststm32@<4.4.0
framework = arduino
board = genericSTM32F103RE
build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
${common.build_flags}
lib_deps = ${common.lib_deps}
lib_ignore = U8glib-HAL
c1921b4
libf3c
lib066
Adafruit NeoPixel_ID28
Adafruit NeoPixel
libf3e
TMC26XStepper
lib_ldf_mode = 1
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
monitor_speed = 250000
#
# STM32F4
#
[env:STM32F4]
platform = ststm32@<6.1.0
framework = arduino
board = disco_f407vg
build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, c1921b4, TMCStepper
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F4>
monitor_speed = 250000
#
# ARMED
#
[env:ARMED]
platform = ststm32@<6.1.0
framework = arduino
board = ARMED
build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel, c1921b4
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F4>
monitor_speed = 250000
#
# MKS Robin (STM32F103ZET6)
#
[env:mks_robin]
platform = ststm32@<6.2.0
#platform_packages =
# toolchain-gccarmnoneeabi@~1.90301.200702
framework = arduino
board = genericSTM32F103ZE
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin.py
build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
${common.build_flags}
-DSTM32_XL_DENSITY
-Wl,-Tbuildroot/share/PlatformIO/ldscripts/mks_robin.ld
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps = ${common.lib_deps}
lib_ignore = c1921b4
libf3c
lib066
Adafruit NeoPixel_ID28
Adafruit NeoPixel
libf3e
TMC26XStepper
#
# Teensy 3.5 / 3.6 (ARM Cortex-M4)
#
[env:teensy35]
platform = teensy
framework = arduino
board = teensy35
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_TEENSY35_36>
monitor_speed = 250000
[env:malyanm200]
platform = ststm32@<6.1.0
framework = arduino
board = malyanM200
build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
#-<frameworks>
lib_ignore =
U8glib
LiquidCrystal_I2C
LiquidCrystal
NewliquidCrystal
LiquidTWI2
Adafruit NeoPixel
TMCStepper
Servo(STM32F1)
TMC26XStepper
U8glib-HAL
c1921b4
#
# Espressif ESP32
#
[env:esp32]
platform = https://github.com/platformio/platform-espressif32.git#feature/stage
board = esp32dev
framework = arduino
upload_port = COM3
lib_ignore =
LiquidCrystal_I2C
LiquidCrystal
NewliquidCrystal
LiquidTWI2
TMC26XStepper
c1921b4
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_ESP32>
#
# FYSETC F6 V1.3
#
[env:fysetc_f6_13]
platform = atmelavr
framework = arduino
board = fysetc_f6_13
build_flags = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
build_src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000
while compiling code in platformio in vs-code am getting this error.
In file included from Marlin\src\HAL\shared../../inc/MarlinConfig.h:30, from Marlin\src\HAL\shared\I2cEeprom.cpp:28: Marlin\src\HAL\shared../../inc/../HAL/HAL_STM32F1/HAL.h:40:10: fatal error: util/atomic.h: No such file or directory 40 | #include <util/atomic.h> | ^
~~~~~~ compilation terminated. In file included from Marlin\src\HAL\HAL_STM32F1../../inc/MarlinConfig.h:30, from Marlin\src\HAL\HAL_STM32F1\u8g_com_stm32duino_fsmc.cpp:29: Marlin\src\HAL\HAL_STM32F1../../inc/../HAL/HAL_STM32F1/HAL.h:40:10: fatal error: util/atomic.h: No such file or directory 40 | #include <util/atomic.h> | ^~~~~~~ compilation terminated. In file included from Marlin\src\HAL\shared../../inc/MarlinConfig.h:30, from Marlin\src\HAL\shared\SpiEeprom.cpp:28: Marlin\src\HAL\shared../../inc/../HAL/HAL_STM32F1/HAL.h:40:10: fatal error: util/atomic.h: No such file or directory 40 | #include <util/atomic.h> | ^~~~~~~ compilation terminated. [.pioenvs\mks_robin\src\src\HAL\shared\I2cEeprom.cpp.o] Error 1 [.pioenvs\mks_robin\src\src\HAL\HAL_STM32F1\u8g_com_stm32duino_fsmc.cpp.o] Error 1 [.pioenvs\mks_robin\src\src\HAL\shared\SpiEeprom.cpp.o] Error 1 In file included from Marlin\src\HAL\HAL_STM32F1\xpt2046.h:24, from Marlin\src\HAL\HAL_STM32F1\xpt2046.cpp:4: Marlin\src\HAL\HAL_STM32F1\HAL.h:40:10: fatal error: util/atomic.h: No such file or directory 40 | #include <util/atomic.h> | ^~~~~~~ compilation terminated. [.pioenvs\mks_robin\src\src\HAL\HAL_STM32F1\xpt2046.cpp.o] Error 1 ==================================================================== [FAILED] Took 8.33 seconds ====================================================================Environment Status Duration
mks_robin FAILED 00:00:08.332 =============================================================== 1 failed, 0 succeeded in 00:00:08.332 ===============================================================The terminal process "C:\Users\Adarsh R S.platformio\penv\Scripts\pio.exe 'run', '--target', 'upload', '--target', 'monitor'" terminated with exit code: 1.
Terminal will be reused by tasks, press any key to close it.