search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
131 stars 129 forks source link

Autoleveling Core XY #23

Open Reinivann opened 6 years ago

Reinivann commented 6 years ago

I would like to connect an autoleveling to a CoreXY(Tronxy X5S), At Home, the standard endstop stops responding and continues to move up because the sensor in home position XY has no contact with the bed. How can I now set the home position in the middle and not as programmed left front Z level.

sahory commented 6 years ago

Hello there did you find any way to stop Z homing at aouto levleing ?

3Dangel commented 6 years ago

You would probably need to play around in the config. Home directions

You can invert them. And establish your sensor in another places

On Fri, Mar 23, 2018 at 15:52 sahory notifications@github.com wrote:

Hello there did you find any way to stop Z homing at aouto levleing ?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/23#issuecomment-375808180, or mute the thread https://github.com/notifications/unsubscribe-auth/AXFrXfMvCTC0cDjviJ1wDdx9PcIiqcVmks5thW6WgaJpZM4Qt8Ny .

sahory commented 6 years ago

I pass this one i need to know how my auto levling say prope didnt untrigger pefor moving i didnt fined how to made it same as broping at smothi config can you help 😀😀