MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
i received my MKS robin but unfortunately it didn't work. So after many test i decided to read the chip with my Segger J-link and it was empty. So if i could flash the bootloader from my J-Link it may save a long and expensive return to factory. The pb is that i can't find the bootloader on this repo, there is only the firmware. I'm owning the 2.3 version of the board
i received my MKS robin but unfortunately it didn't work. So after many test i decided to read the chip with my Segger J-link and it was empty. So if i could flash the bootloader from my J-Link it may save a long and expensive return to factory. The pb is that i can't find the bootloader on this repo, there is only the firmware. I'm owning the 2.3 version of the board
Thanks in advance