search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
131 stars 129 forks source link

Wifi module not detected after new update #27

Open yummyburger opened 6 years ago

yummyburger commented 6 years ago

Hi,

After new update of V2.0.6. My wifi module cannot be detected anymore. It was working fine before the update. I realise the MksWifi file does not change after flashing, please advise

makerbase-mks commented 6 years ago

where do you download the firmware?

3Dangel commented 6 years ago

Github

https://github.com/makerbase-mks/MKS-Robin/tree/master/Firmware

On Thu, Mar 1, 2018 at 23:25 makerbase notifications@github.com wrote:

where do you download the firmware?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/27#issuecomment-369833704, or mute the thread https://github.com/notifications/unsubscribe-auth/AXFrXdPCScoHLkgTaT7V5PDVZwddBgXWks5taOXbgaJpZM4SEvZY .

yummyburger commented 6 years ago

like 3Dangel says, your makerbase github. where else can i download

makerbase-mks commented 6 years ago

OK, we will fix the bug as soon as possible

makerbase-mks commented 6 years ago

@yummyburger @3Dangel We updated the firmware.

3Dangel commented 6 years ago

Thanks! Will try

On Wed, Mar 21, 2018 at 03:22 makerbase notifications@github.com wrote:

@yummyburger https://github.com/yummyburger @3Dangel https://github.com/3dangel We updated the firmware.

— You are receiving this because you were mentioned.

Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/27#issuecomment-374875727, or mute the thread https://github.com/notifications/unsubscribe-auth/AXFrXdoPgDBYz4tTik0C5YGbU_TBCbzIks5tghvugaJpZM4SEvZY .

yummyburger commented 6 years ago

3Dangel, yors working? my no difference, the MksWifi.bin doesn't flash and remains the same

3Dangel commented 6 years ago

No, I haven’t had time to test anything yet. Busy with jobs and it might be a month before I get back to 3D printing. Sorry my friend.

On Fri, Mar 23, 2018 at 00:03 yummyburger notifications@github.com wrote:

3Dangel, yors working? my no difference, the MksWifi.bin doesn't flash and remains the same

— You are receiving this because you were mentioned.

Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/27#issuecomment-375554211, or mute the thread https://github.com/notifications/unsubscribe-auth/AXFrXQOTbNSrjS2qTA9GCXbS4m87Qwfgks5thJATgaJpZM4SEvZY .

makerbase-mks commented 6 years ago

@yummyburger Does firmware update back to V_2.0.4 WiFi module work normally?

yummyburger commented 6 years ago

@makerbase-mks sad to say no, it doesnt do anything. All files got updated except the mkswifi.bin file still remains the same. Dont know whats wrong

makerbase-mks commented 6 years ago

@yummyburger Maybe wifi module is damaged.

yummyburger commented 6 years ago

what, bought my 3d printer for 6 months, robin touch screen faulty and manufacturer send me a new screen, then found out board also spoil. waited again, while waiting, ordered wifi module from mks. all reached and the only thing in 6 months i printed is a test cube and now the wifi module spoil. geez. cant believe this