Delta Printer with mechanical Probe

[Danijele]

Hello together, I bought the Anycubic Kossel Plus Delta printer and after the Trigorilla was broken I Bought the MKS Robin V2.4. So far everything seems to be o.k. excluding Auto bed Leveling is not working at all. I connected the Z-Probe (it's ad on with mechanical Endstop) to -Z Enstop conection! Problem is: When I'm performing leveling the machine goes down and when touching the hot bed the the whole Head rattles over the hotbed top. Even when I'm triggering the probe nothing works. I setet up the Zero in the Center of Hotbed, means wwhen mooving down the nozzle stops 1/10 of a mm before the hotbed. I setetup the paramete: "Z_PROBE_HEIGHT -15.8". My problem is that the Probe after touching did not rises up, goes to next probing coordinate and plunges down for next triggering......May somebody help me or rather send mey maybe the config file form Delta with working Autoleveling?!?

Thank you in advance! Danijel

[Danijele]

Hello togehter, problem solved....If you need help just ask! So far MKS Robin is working propper with my Delta Printer! Danijel.Timic@gmx.de

[3Dangel]

What was your solution? Thanks for sharing !! Robert

On Wed, May 23, 2018 at 14:23 Danijele notifications@github.com wrote:

Hello togehter, problem solved....If you need help just ask! So far MKS Robin is working propper with my Delta Printer! Danijel.Timic@gmx.de

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/42#issuecomment-391483944, or mute the thread https://github.com/notifications/unsubscribe-auth/AXFrXWMri_U9HQ3tM1aIpyzGN8vPfZQ4ks5t1cUzgaJpZM4UHXyI .

[Danijele]

Hello Robert,  first Off all technical parameters and especially z-length Probe z hight has to be accurate. Z Probe Connect to -Z Endstop ans thats it! Best wishes!

⁣Gesendet mit BlueMail ​

Am 24. Mai 2018, 23:29, um 23:29, 3Dangel notifications@github.com schrieb:

What was your solution? Thanks for sharing !! Robert

On Wed, May 23, 2018 at 14:23 Danijele notifications@github.com wrote:

Hello togehter, problem solved....If you need help just ask! So far MKS Robin is working propper with my Delta Printer! Danijel.Timic@gmx.de

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub

https://github.com/makerbase-mks/MKS-Robin/issues/42#issuecomment-391483944, or mute the thread

https://github.com/notifications/unsubscribe-auth/AXFrXWMri_U9HQ3tM1aIpyzGN8vPfZQ4ks5t1cUzgaJpZM4UHXyI .

-- You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub: https://github.com/makerbase-mks/MKS-Robin/issues/42#issuecomment-391869155

[3Dangel]

Thanks for the info. Cheers Ribert

On Fri, May 25, 2018 at 00:22 Danijele notifications@github.com wrote:

Hello Robert, first Off all technical parameters and especially z-length Probe z hight has to be accurate. Z Probe Connect to -Z Endstop ans thats it! Best wishes!

⁣Gesendet mit BlueMail ​

Am 24. Mai 2018, 23:29, um 23:29, 3Dangel notifications@github.com schrieb:

What was your solution? Thanks for sharing !! Robert

On Wed, May 23, 2018 at 14:23 Danijele notifications@github.com wrote:

Hello togehter, problem solved....If you need help just ask! So far MKS Robin is working propper with my Delta Printer! Danijel.Timic@gmx.de

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub

< https://github.com/makerbase-mks/MKS-Robin/issues/42#issuecomment-391483944 , or mute the thread

< https://github.com/notifications/unsubscribe-auth/AXFrXWMri_U9HQ3tM1aIpyzGN8vPfZQ4ks5t1cUzgaJpZM4UHXyI

.

-- You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub:

https://github.com/makerbase-mks/MKS-Robin/issues/42#issuecomment-391869155

— You are receiving this because you commented.

Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/42#issuecomment-391954154, or mute the thread https://github.com/notifications/unsubscribe-auth/AXFrXbVdX1LXaxqDPpquQsKD9FkNPfq6ks5t16M8gaJpZM4UHXyI .