search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
131 stars 129 forks source link

mks robin mini update problem #54

Open amirfpv opened 6 years ago

amirfpv commented 6 years ago

Hello, i tried to update my mks robin mini to new 2.0.7 firmware, but after update process completed, the screen became black and "readyprint" message showed on the screen. i emailed to mks support but no reply!!! if somebody updated his robin mini to 2.0.7 successfully please let me know or upload the zip file here. thank you

amirfpv commented 6 years ago

Close source firmware without any support!! Waste of money and time

makerbase-mks commented 6 years ago

Hello, what is the hardware version of your Robin mini? If you have a longer version of robin mini 1.0, you may not be able to update the firmware of 2.0.7.

amirfpv commented 6 years ago

Yes i have robin mini v1.0 So what should i do now? Auto leveling doesn't work probably in firmware 2.0.6

On Wed, Oct 17, 2018, 10:55 makerbase notifications@github.com wrote:

Hello, what is the hardware version of your Robin mini? If you have a longer version of robin mini 1.0, you may not be able to update the firmware of 2.0.7.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/54#issuecomment-430519479, or mute the thread https://github.com/notifications/unsubscribe-auth/ApEEQ4mRbDIPU5pwg49_Hrl511TY6LQAks5ultuDgaJpZM4WeOfv .

makerbase-mks commented 6 years ago

Yes, robin mini v1.0 can only be updated to 2.0.6

amirfpv commented 6 years ago

Yes what? I have problem with auto leveling and firmware 2.0.6 is not complete It seems mks sell it's prototype boards first and stop support after a short time Why mks mini v1.0 not updated to firmware 2.0.7 while it has problem with firmware 2.0.6?!!!

On Wed, Oct 17, 2018, 11:55 makerbase notifications@github.com wrote:

Yes, robin mini v1.0 can only be updated to 2.0.6

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/MKS-Robin/issues/54#issuecomment-430536649, or mute the thread https://github.com/notifications/unsubscribe-auth/ApEEQ7sOmuZHKdc6HLrk_XyRIJjFxkI7ks5ulul4gaJpZM4WeOfv .

stickfisch commented 5 years ago

Its possible with robin mini v2 can input jerk settings?