search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
131 stars 129 forks source link

sd card limits #66

Closed mattdog01 closed 5 years ago

mattdog01 commented 5 years ago

Is there a limit to the size, type or format of an SD card used on the MKS-Robin? I have a new 64gig sdxc card and the Robin can't see any of the files. :( I have a 2nd card, smaller and straight SD and it works just fine. Thanks for any help you can give.

valentinoo0 commented 5 years ago

Now im using 32gb and works good but I dont know if could support 64 gb sorry mate.

mattdog01 commented 5 years ago

Thanks for the info valentinoo0. I guess 64gb is pushing the limits. All the best.

mattdog01 commented 5 years ago

After a bit of research I found out that the Robin needs FAT32 file partitions and that Windows with not partition in FAT32 above 32Gig SD cards. I found a utility that for now is free to use and it worked perfectly. I reformatted my 64 Gig SD card in FAT32 and it works like a charm. The utility is called "AOMEI Partition Assistant Standard Edition 7.5.1". SO if you want to use a large SD card with your Robin this works. Happy Printing.